User`s manual

25
5.1 PPPoE Settings
Prior to PPPoE settings, please make sure the ADSL has been connected to the encoder server and the
user knows the login username and password.
Enter the remote configuration interface by referring to Chapter 3 and Chapter 4.
Figure 5.1.1 PPPoE Settings
Select PPPoE Settings from the Remote Configuration interface, and then click the checkbox of Enable
PPPoE. Enter the user name and password of ADSL and click Save. The system will display the following
message:
Click “OK” to enable the PPPoE settings to take effect after rebooting the device.
VP-16 also supports DDNS as well. Select the DDNS Settings from the Remote Configuration
interface, and then click the checkbox of Enable DDNS. Refer to Figure 5.1.2.