User`s manual

23
Refer to Chapter 4.2 and Chapter 4.3 for entering the remote configuration of VP-16 Encoder Server. In
RS-485
Settings menu, as shown in Figure 4.4.1, configure the bit rate, receiver protocol and address, which
must be the same with the configuration in connected pan/tilt unit or speed dome.
Figure 4.4.1 RS485 Settings
Enter the Preview interface, and click the corresponding channel of the connected pan/tilt unit or speed
dome to operate PTZ movement by using the PTZ control buttons.
Figure 4.4.2 PTZ Control
Note: The PTZ control functions are mainly realized by client software or IE browser.