User`s manual

16
Commands Description:
Commands
Utilities
helpm
Console help command is used to print common commands, show as Figure 3.2.
getIp
Show the current IP address of decoder. Command format: getIp + “Enter”.
setIp
Set decoder IP address.
Command format: setIp IP: mask, e.g. setIp 192..168.1.11:255.255.255.0
getPort
Get data port of the current video server. Command format: getPort+ “Enter”
setPort
Get data port of the video server. Default port: 8000, command format:
getPort+Port No.,
e.g., setPort 9000.
getGateway
Show current decoder gateway address. Command format: getGateway+ “Enter”.
setGateway
Setup decoder gateway.
Command format: setGateway Gateway, e.g. setGateway 192.168.1.1
Note: These are only common commands. The other commands please consult our technical
engineers.