User`s manual

15
Press “Apply” and “OK” after the setup.
Press “Enter” under Hyper Terminal interface. When “[root@dvrVP-16 /]#” appears, the connection is
established.
According to the tips, disconnect and save “VI” for the next time. After saving, there will be a new
“Hyper Terminal” item established in the program group “Start”-> “Accessories”-> “Communications”->
“Hyper Terminal.” “Connection” names of all Hyper Terminal are included. You can see an icon named as
“VI” here.
Figure 3.1.5
3.2 Network Configuration by Hyper Terminal
Enter Hyper Terminal
Click “Start”-> “Programs”-> “Accessories”-> “Communications”-> “Hyper Terminal”-> “HK”, then the
Hyper Terminal interface will appear as figure below.
Type “Enter” and the prompt “[root@dvrVP-16 /]#” will appear, which means connection between RS232
interface of PC and RS232 interface of VP-16 is established successfully by Hyper Terminal.
The following operation commands are to accomplish the parameters setup in the prompt