User manual

60
9.3.1 Restarting the Device
On the Maintenance> Restart interface, click Restart to enter the following dialog box:
Figure 9.4 Restart the Device
Click OK to restart the device or Cancel to cancel the operation.
9.3.2 Restoring Default Settings
On the Maintenance> Default interface,, click Restore or Default to restore device parameters to the
factory settings.
Figure 12.5 Restore Default Settings
 By selecting the Restore button, the device restores the default settings for the parameters except
the IP address, subnet mask, gateway and port.
 By selecting the Default button, the device restores the default settings for all parameters.
On the pop-up message box, click OK to restore and reboot the device to validate the settings.
Figure 9.6 Pop-up Message Box
9.3.3 Importing/Exporting Parameters
The configuration files of the device can be exported to local device for backup; and the configuration
files of one device can be imported to multiple device devices if they are to be configured with the same
parameters.
 On the Maintenance> Import Parameters interface, click Browse to select the file from the
selected backup device and then click the Import button to import a configuration file,