User manual

53
6. When finishing the area setting, click the button to finish drawing.
You can click the button to clear all of the areas you set without saving it.
7. Click Save to save the settings.
7.5 Configuring RS-232/485 Settings
7.5.1 RS-232 Settings
Purpose:
The RS-232 serial port can be used for the configuration by the serial port management tools.
Steps:
1. Click Remote Configuration> Serial Port Settings> 232 Serial Port to enter RS-232 port setting
interface:
Figure 7.24 RS-232 Port Settings
Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-232 should be
exactly the same with the parameters you configured here.
2. Click Save to save the settings.
7.5.2 RS-485 Settings
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ parameters
should be done before you control the PTZ unit.
Steps:
1. Click Remote Configuration> Serial Port Settings> 485 Serial Port to enter RS-485 port setting
interface: