User manual

50
6. You can copy your settings to other alarm inputs.
7. Click Save to save the settings.
7.3.3 Configuring Video Loss Alarm
Steps:
1. Click Remote Configuration> Camera Settings> Video Loss to enter the video loss alarm setting
interface.
Figure 7.20 Video Loss Alarm Settings
2. Select the camera to configure the video loss alarm.
3. Check the checkbox of Enable Video Loss.
4. Click Edit to edit the arming schedule for video loss detection. The arming schedule configuration is
the same as the Setting of the Arming Schedule for Motion Detection. Please refer to Step 2 Set the
Arming Schedule for Motion Detection in Section 7.3.1 Configuring Motion Detection.
5. Click the Linking Method tab to set the actions taken for the video loss alarm. Please refer to Step
3 Set the Alarm Actions Taken for Motion Detection in Section 7.3.1 Configuring Motion Detection.
7.3.4 Configuring Tamper-proof Alarm
Purpose:
If you enable this function, an alarm will be triggered when the image of camera is tampered with.
Steps:
1. Click Remote Configuration> Camera Settings> Tamper-proof to enter the Tamper-proof
Settings interface.
2. Select the camera to configiure the tamper-proof detection alarm.