User manual

49
Figure 7.18 Alarm Input Settings-Arming Time
3. Set the arming schedule for the alarm input. Refer to Step 2 Set the Arming Schedule for Motion
Detection in Section 7.3.1 Configuring Motion Detection.
4. Click the Linking Method tab to set the actions taken for the alarm input. Refer to Step 3 Set the
Alarm Actions Taken for Motion Detection in Section 7.3.1 Configuring Motion Detection.
5. You can also choose the PTZ linking for the alarm input if your camera is installed with a pan/tilt unit.
(1) Choose the PTZ Linking channel.
(2) Check the relative checkbox to enable Preset Calling, Patrol Calling or Pattern Calling.
Figure 7.19 Alarm Input Settings-Linking Method