User manual

34
• NO-IP:
(1) Enter the Server Address for NO-IP.
(2) In the Domain Name text field, enter the domain obtained from the NO-IP website
(www.no-ip.com).
(3) Enter the User Name and Password registered on the NO-IP website.
(4) Click Save to save the settings.
Figure 7.14 NO-IP Settings
6.3.4 Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers if an alarm event
is detected, e.g., motion detection event, video loss, tamper-proof, etc.
Before you start
1. Before configuring the Email settings, the device must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network must also be connected to either an intranet or the
Internet depending on the location of the e-mail accounts to which you want to send notification.
2. Please configure the DNS Server settings under Remote Settings>Network Settings>Basic
Settings before using the Email function.
Steps:
1. Enter the Basic Network Settings (Remote Configuration > Network Settings > Basic Settings)
to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server.
2. Click the Remote Configuration > Network Settings > Email Settings to enter the Email Settings
interface: