User manual

33
(3) Enter the User Name and Password registered in the DynDNS website.
(4) Click Save to save the settings.
Figure 6.11 DynDNS Settings
• IPServer:
(1) Enter Server Address for IPServer.
(2) Click Save to save the settings.
Note: For the IP Server, You have to apply a static IP, subnet mask, gateway and primary DNS
from the ISP. The Server IP should be entered with the static IP address of the PC that runs
IPServer software.
Figure 6.12 IPServer Settings
• PeanutHull:
(1) Enter User Name and Password obtained from the PeanutHull website.
(2) Click Save to save the settings.
Figure 6.13 PeanutHull Settings