User manual

29
Figure 6.2 Time Settings
2. Select the Time Zone.
Select the Time Zone that is closest to the device’s location from the drop-down menu.
Figure 6.3 Time Zone Settings
3. Configure the time synchronization by NTP server or by manually.
 Configuring Time Sync by NTP Server
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of
system date/time.
If the device is connected to a Dynamic Host Configuration Protocol (DHCP) network that has time server
properties configured, the camera will synchronize automatically with the time server.
Enable the NTP function by checking the checkbox, and configure the following settings:
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP server. It can be set
from 1 to 10080 minutes.
Figure 6.4 Time Sync by NTP Server
Note: If the device is connected to a public network, you should use a NTP server that has a time