User manual

Figure 5.7 PTZ Linking

Please refer to Chapter 7.3 Configuring and Handling Alarms for the PTZ Linking settings (Remote

Configuration>Alarm Settings>Alarm Input>Linking Method).

5.5 Configuring Video Parameters

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera

name, etc.

Steps:

1. In the live view interface, click the button on the bottom right corner to spread the

Video Parameters Setting interface:

Figure 5.8 Video Parameters Settings

2. Move the slider to adjust the brightness, contrast, saturation and hue.

Note: The range of adjustment is 0 to 100; the default setting is 60.

You can also click the button to restore the default settings.