User manual

16
command format: getPort+Port No., e.g., setPort
9000.
getGateway
√
√
Get current gateway address. Command format:
getGateway+ “Enter”.
setGateway
×
√
Set gateway.
Command format: setGateway Gateway, e.g.,
setGateway 192.168.1.1.
setEnaAlarmSms
×
√
Enable SMS alarm.
setWhiteList
×
√
Set whitelist.
getWhiteList
√
√
Get whitelist.
delWhiteList
×
√
Delete whitelist.
setOffLineTime
×
√
Set offline time.
setCmsAddr
×
√
Set IP address of push mode.
setUserName
×
√
Set user name of push mode.
setPuPsw
×
√
Set password of push mode.
setNetType
×
√
Set network type.
showPuParam
√
√
Get push mode parameters.
setSdkPrint
×
√
Set push mode print.
If you want to switch to guest from admin, you may type the “su guest” command. When symbol “$”
appears, it indicates the current user account has switched to guest.
Figure 3.8 Switch to guest
3.3 Advidia Device Utility
Purpose:
To view and configure the device via LAN (Local Area Network), you need to connect the
network device in the same subnet with your PC. Then install the Advidia Device Utility to
find your Advidia Camera or Encoder
 The following figure shows the cable connection of a network camera and a PC: