User manual

15
Figure 3.6 Enter guest User Account
3. Enter admin user account.
(1) Type “su admin” and press “Enter”.
(2) Input the password (default: 12345) of the admin user account.
(3) Press “Enter” to have the symbol “#”on the interface which indicates the current login user is
admin.
Figure 3.7 Enter admin User Account
4. Type the commands described in Table 3.1 to configure the parameters of the device.
Table 3.1 Description of Commands
The admin and guest have different permission to use commands. Please refer to the following table:
Command
guest
admin
Description
helpm
√
√
Console help command is used to print common
commands
getIp
√
√
Get the current IP address of the device. Command
format: getIp + “Enter”.
setIp
×
√
Set IP address.
Command format: setIp IP: mask, e.g., setIp
192..168.1.11:255.255.255.0
getPort
√
√
Get data port of the current video server. Command
format: getPort+ “Enter”.
setPort
×
√
Get data port of the video server. Default port: 8000,