User manual

13
Step 3: Select the communication port.
Select “COM1” in “Connect To” interface (Please select the COM port according to the reality, in case PC
has more than 1 COM.). Press “OK” to enter “Properties” dialogue box.
Figure 3.2 Select Communication Port
Step 4: Serial port setup.
Set port parameters in “COM1 Properties” dialogue box as follow:
Figure 3.3 Set up Port
The parameters should be:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Press “Apply” and “OK” after the setup.