User manual

Advidia A200 User Manual
26 26
41
Call pattern 1
101
Start panorama scan
42
Call pattern 2
102
Call patrol 5
43
Call pattern 3
103
Call patrol 6
44
Call pattern 4
104
Call patrol 7
92
Start to set limit stops
105
Call patrol 8
*Note: You may need to use the OSD (On Screen Display) menu when controlling the
speed dome remotely. To display the OSD menu on the live view screen, you can call
the preset number 95.
4.5.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
3. Click to enter the adding interface of preset as shown in Figure 4-7.
Figure 4-7 Adding Presets
4. Configure the preset number, patrol time and patrol speed.