User manual

Advidia A200 User Manual
20 20
Figure 3-5 Install Plug-in (3)
*Note: You may have to close the web browser to install the plug-in. Please reopen
the web browser and log in again after installing the plug-in.
Chapter 4 Live View
4.1 Power-up Action
After the power is applied, the speed dome will perform self-test actions. It begins
with lens actions and then pan and tilt movement. After the power-up self-test
actions, the information as shown in Figure 4-1 will be displayed on screen for 40
seconds.
The System Information displayed on the screen includes the dome model, address,
protocol, version and other information. The COMMUNICATION refers to the baud
rate, parity, data bit and stop bit of the dome. e.g., “2400, N, 8, 1” indicates the dome
is configured with the baud rate of 2400, no parity, 8 data bits and 1 stop bit.
Model XX-2XXXXX-X
ADDRESS 0
COMMUNICATION 0000,0,0,0
SOFTWARE VERSION V000
CAMERA VERSION V000
LANGUAGE ENGLISH
Figure 4-1 Power-up information