User manual

 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or
when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Figure 4-5 Calling a Preset
4.5 Configuring Live View Parameters
Purpose:
You can select the stream type and adjust the image size on the live view page.
 Click or tab under the menu bar of the live view
interface to select the stream type as main stream or sub-stream for live viewing.
 Click each tab to set the image size to 4:3, 16:9, original or
auto fix.
Note: Please refer to Section 5.4.1 Configuring Video Settings for more detailed
settings about video parameters.
Chapter 5 Network Camera
Configuration
5.1 Configuring Local Parameters
Note: The local configuration refers to the parameters of the live view, record files
and captured pictures. The record files and captured pictures are the ones you record