Setup guide

Advidia A-46 Mini Dome
10/16/2012 Page 15
o Tilt the camera up or down.
o Zoom in or out.
o Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
Note: You can configure up to 128 presets.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when an event
takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click to call the preset.
Figure 2-3 Calling a Preset
Linking to Alarm:
The preset can also be linked to the alarm input when there is an alarm event occurring.
Figure 2-4 PTZ Linking