Installation guide

CH # Channel Name Quality % Quality %

Record Signal Quality Sample Readings

Installation Notes:

To verify that the dish is accurately aligned for reception of all

Adventist channels, press the CH/UP arrow to surf through all of the

preprogrammed TV and Radio channels and verify that the Signal

Quality is 50% or better on all channels.

If the Signal Quality is below 50% on any of the channels, place the

receiver on the channel with the lowest quality reading and make

very small movements to the dish elevation and/or the dish panning

side-to-side (azimuth) and /or LNBF rotation to peak the quality.

If the Signal Quality reading remains low after attempting any

combination of these adjustments, it is possible that the dish was not

checked for warping or corrected before assembling the dish.