Installation guide

www.AdventistSat.com Toll Free 866-552-6882

Item Quantity Description Size

1 6 Carriage Bolt M6 - 12mm

2 2 Phillips Screw M4 - 16m

3 2 Hex Nut M4

4 12 Hex Nut 10mm M6

5 2 Carriage Bolt M6 - 20mm

6 1 Structural Bolt 10mm M6 - 60mm

7 2 Elevator Bolt M6 - 30mm

8 2 Washer M6

A 4 Hex Flange Bolt M6 - 12mm

B 1 Hex Nut 10mm M6

C 1 Hex Tap Bolt M6 - 90mm

D 1 Fastener Insert

GEOSATpro 90cm Dish Hardware

Please contact AdventistSat at 866-552-6882 if any of these parts

are missing or damaged. Most replacement or damaged hardware

items can be found at a local hardware supply store.

If the reﬂector edges are not laying

perfectly ﬂat, pick up the dish by

the edges like a steering wheel and

quickly thrust the reﬂector away from

your body while holding the edges of

the dish. This action will cause the

reﬂector to ﬂex and it will spring back

into the factory pressed shape. Lay the

reﬂector face down and observe if the

edges are now laying perfectly ﬂat. If

not, repeat the ﬂexing process until the

reﬂector edges are uniform and laying

perfectly ﬂat against the surface.