TOCMR-OE100 Owner’s Manual
Introduction Congratulations on your purchase of the TOCMR-OE100 Mobile Multimedia Receiver. Please read the instruction manual for this product before using. The documentation provided will allow you to fully enjoy all the features this unit has to offer. Please save this manual for future reference. iPod® Control “iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Expanding Systems iPodVTR etc. Expanding audio features Expanding visual features.
Contents WARNINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CONTROLS AND INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Turning the Unit ON or OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BLUETOOTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 BLUETOOTH MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 BLUETOOTH OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Entering Bluetooth Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETUP MENU (continued) GPS Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Touch Screen Calibration. . . . . . . . . . . . . . . . . . . . . .
Features General •B luetooth - Bluetooth hands-free profile for safety / convenience and A2DP profile for streaming music from a PDA / PMP • Navigation Ready • Infrared Remote Control • Two Composite Video Outputs for Additional Screens • One Audio /Video Auxiliary Inputs • Rotary Encoder Audio Control • Seven-Band EQ with Eleven Preset EQ Curves • Rear Camera Input DVD • Aspect Ratio - 16 : 9 or 4 : 3 • Fast Forward, Fast Reverse - 2X, 4X, 8X and 16X • Play, Pause, Stop, Next Chapter and Previous Chapt
Sat Radio Ready • Compatible with XM and Sirius Tuners (Sold Separately) • Satellite Channel Name, Artist, Song and Categories Displayed on Monitor iPod • Access iPod Playlists, Artists, Albums, Songs, *Photos and *Video (* Requires Photo or Video iPod) • Power Management Charges iPod while Connected • iPod Interface Cable (included) Media • USB - Supports Hard Drives and Flash Memory Drives • 3.
Controls and Indicators 2 3 4 5 6 7 8 9 1 10 18 17 16 15 11 12 13 14 1. Power on/off and volume control knob Press and hold for 3 seconds to turn the unit off. Press again to turn the unit on. Increase the volume by rotating the knob clockwise. Decrease the volume by rotating the knob counter-clockwise. 2. AV IN Jack Jack (3.5mm) which provides an audio or video input jack. 3. Microphone The microphone is located on the left side of the unit. For best reception, speak loudly and clearly. 4.
. Reset Button Press to reset system to correct a system halt or other illegal operation, use the tip of a pen to press the reset button. 10. Scroll Tuning Knob: When the unit is set to Radio mode pressing this button will acquire the next or previous available frequency. When the unit is set to iPod/MP3/USB/SD player mode, this button will select a song in iPod/MP3/USB/SD player mode or channel in Satellite radio mode. 11. NAV Button Press this button to access the Navigation mode. 12.
Turning the Unit ON or OFF: Press the front panel PWR button to turn the unit on. The unit can also be turned on buy pressing the front remote control power button. To turn the unit off, press and hold the front panel PWR button for 2 seconds or press the front remote control power button. Volume Adjustment: To increase or decrease the volume level, turn the front panel PWR button or press the VOL+/ VOL- buttons on the front remote control.
Audio Adjustments: 1. Press the unit’s front panel SEL TUNE button or press SEL on either the front or rear remote control to access the Equalizer Control Menu. 2. Press and hold either the left/right cursor buttons to move the highlight on the feature to be adjusted to a negative or positive value. To left of the cursor buttons is a numerical value for the feature being adjusted.
Main Menu MAIN MENU SETUP: Press to access the unit’s setup menu AM/FM: The setup menu consists of a submenu Press to access AM/FM TUNER mode. which contains General, Video, Audio, CD/DVD: and other unit settings. Press to access CD/DVD mode, (CD/DVD AV 2: must be inserted). Press to access the audio video input SD CARD: (AV2) mode. The input can be various Press to access the contents of the SD media devices such as an iPod etc. When Card (SD card must be inserted).
AM/FM Radio Preset List RADIO MENU RADIO-FM Icon: Indicates the frequency band that is currently playing. When pressed the user is returned to the Main Menu. Antenna Icon: As the strength of the radio signal increases, the number of illuminated segments will increase. ST Icon: This icon appears when the radio station frequency is broadcasted in stereo. HD Icon: Indicator appears when the unit is tuned to a radio station frequency that contains a HD Digital AM or FM radio signal.
A/D Icon: Press to select the radio frequency signal reception mode. The choices consist of Digital (D), Analog (A) and AUTO. This icon indicates the radio signal type that the unit is set to access. When the unit is set to analog only analog radio signals will be accessed. When the unit is set to digital only digital or HD radio signals will be accessed. When the unit is set to automatic (AUTO) the unit will access both analog and digital (HD) signals.
PTY SCREEN PTY Icon: Press to change the display to the main radio screen. Press the icon again and the multi-line display format returns. When the PTY function is enabled, pressing a category (news, sports, talk etc.) will cause the unit to search for the desired topic. Call Letters: Displays the radio station call letters of the radio station currently playing. Category List: The unit contains thirty two categories that can be searched.
HD SUB-CHANNEL SCREEN If the currently playing radio channel is a HD Radio channel with multiple digital sub-channels pressing the HD Icon button will display all the sub channels. The radio must be set to DIGITAL or AUTO to receive the HD signal and sub-channels. Pressing a HD sub-channel in the list will cause that channel to be played. DIRECT TUNING SCREEN When the Keyboard Icon is pressed in the Radio Screen a keyboard will appear.
Audio Disc AUDIO DISC MENU Icon: Press the icon to stop playback of the DISC Icon: track. Indicates that a disc is in the unit. When Icon: pressed the user is returned to the Main Press the icon and the additional butMenu. tons on the lower portion of screen are Bluetooth Icon: hidden. Press the icon again and the The icon will be light blue when paired additional buttons are displayed on the to a device and gray when not paired. screen.
SCAN Icon: Press to access the scan function which will play the first 10 seconds of each track on the disc. When a desired track is reached, press the Scan button again or the highlighted track in the preset list to cancel the function. Play of the selected track will continue. Icon: Press to access the random play function. This function will play the songs on the CD in a random, shuffled order. The random play icon ( ) will appear on the display panel.
DISC/SD CARD/USB NOTE: The adjacent screen is practically the same for SD Cards and USB devices. Aside from identifying the media type in the left corner, the screen contains the same features. DISC/SD CARD/USB MENU Audio Mode (MP3, WMA Files) DISC Icon: Indicates that a disc is in the unit. When pressed the user is returned to the Main Menu. Bluetooth Icon: The icon will be light blue when paired to a device and gray when not paired.
Previous Icon: Press the icon to access the previous track on the disc. Each momentary tap of the icon will proceed the next lower track number. Press and hold to fast forward at 2x, 4x, 16x normal speed. Release the icon and return to normal playback speed. Keyboard Icon: Press to access the direct access song selection function. When the icon is pressed a keyboard will appear. The user can enter the desired track number and press OK. The track will begin to play.
JPEG Menu Screen Arrow Icon: Press the icon to access the main menu. Clockwise Rotation Icon: Press this icon to rotate the image clockwise in 90 degree increments. Counter Clockwise Rotation Icon: Press this icon to rotate the image counter clockwise in 90 degree increments. Next Icon: Press to advance to the next Image. Previous Icon: Press to advance to the previous Image. Stop Icon: Press to stop the image slide show presentation.
MPEG Menu Screen Arrow Icon: Press the icon to access the main menu. A-B Icon: Press to repeat a specific portion from point A to point B of the disc. During playback press A-B to set the starting point A. Press A-B a second time to set the ending point B. The player will repeatedly play the part between Point A and Point B. Press A-B a third time to cancel A-B repeat and resume playback. Repeat Icon: Press the icon during playback to repeat the current chapter.
DVD select the subtitle language if the disc is recorded in multiple languages. Each 1. I NFO Icon: time the icon is pressed a different Press to access information regarding subtitle language is selected. The the DVD that is playing. Refer to the subtitle function can also be turned DVD Information Screen. on or off. 2. CHAP Icon: 7. Arrow Icon: Press to search the DVD disc by title, Press the icon to access the main menu. chapter or by elapsed time. Refer to 8. MENU: the DVD Search Screen.
DVD Information Screen When the DVD information function is activated by pressing the INFO icon, a screen will appear containing DVD disc information.
Settings and Adjustments Picture (PIC) Button When watching a program, the picture quality can be adjusted to suit your preferences. 1. Press the PIC button on the front remote control and the front panel displays the “adjustment bar” for BRIGHTNESS. BRIGHTNESS 11 2. Once the desired adjustment bar is displayed, use the or cursor buttons to adjust the setting from 0 to 20. The brightness will increase or decrease by one increment each time a cursor button is pressed.
Subtitle Display and Language Select: 1. Press the SUB.-T button on the front remote control or the SUB.-T icon on the front panel. 2. The current language and the total number of subtitle languages will be displayed. 3. Press the SUB.-T button or the icon again and the subtitle language will change. 4. Press the SUB.-T button or the icon consecutively to obtain the desired subtitle language. 5. Pressing the SUB.-T button or the icon consecutively and the subtitle off option will appear.
Bluetooth BLUETOOTH MENU CALL LOG Icon: The CALL LOG feature is enabled only Bluetooth Icon: when paired with a wireless phone. Indicates the unit’s Bluetooth menu. Press the CALL LOG icon and the call When pressed the user is returned to register will appear on the front panel if the Main Menu. the function is supported by the wireAntenna Icon: less phone.
BLUETOOTH OPERATION Bluetooth® technology has the capability to wirelessly synchronize and transfer data among devices. The Bluetooth audio capabilities can be used for wireless phones hands free applications. Bluetooth has many profiles and the unit is compatible with most Bluetooth enabled wireless phones.
Pairing the Unit and a Wireless Phone: 1. Press the front panel MENU button and then press the BLUETOOTH icon to access the Bluetooth main menu. 2. Select the Bluetooth setup option on the wireless phone to be paired (please refer to the wireless phone’s instruction manual to enter Blue7. Using the keypad enter the PIN or tooth setup, turn Bluetooth on/off, Passkey to your wireless phone and and perform pairing). Access the press OK.
Deleting a Paired Wireless Phone(s): 1. Press the front panel MENU button and then press the BLUETOOTH icon to access the Bluetooth main menu. 2. Press the DEL ALL icon. The following screen will appear: 10. Once the Bluetooth main menu appears on the unit’s front panel the wireless phone and the unit have paired. 11. In the event the unit and the wireless phone fail to pair or bond the following screen will appear. 3. Press the YES icon. The following screen will appear: 12.
Managing Incoming Calls: When connected to a Bluetooth phone, the unit will mute audio output, pause CD play, and change to the Bluetooth screen below when a call is received. The incoming phone number or assigned name for that number will appear in the middle of the screen. An audible tone will sound from the unit and a graphic display will appear on the front panel. If the incoming call has no caller ID, the unit will display “Private Caller”.
Making an Outgoing Call: Outgoing calls can be performed in two manners. The outgoing call can be direct dialed using the front panel keypad or the by pressing the CONTACTS icon, selecting a name and pressing the phone number. Direct Dialing: 1. Press the front panel MENU button and then press the BLUETOOTH icon to access the Bluetooth main menu. The following screen will appear: Outgoing Call Using Contact Dialing: 1.
Call Transfer: While talking, to transfer audio from the unit back to the wireless phone, press the icon. You can only transfer a call after it has been answered. Pressing the icon again will return the audio from the wireless phone to the unit. Menu List: The menu list appears on the right side of the Bluetooth main menu screen. NOTE: Not all wireless phones allow access to missed, received or dialed calls and some will not allow uploading of your wireless phone’s address book.
Missed Calls List: the unit. The default passkey for the unit is “1234”. NOTE: Please quit A2DP mode before attempting to make a phone call, as unexpected results may occur depending on your wireless phone model. The unit can control a Bluetooth audio player via Advanced Audio Distribution Profile (A2DP) or Audio/Video Remote The Missed Calls List retrieves the list Control Profile (AVRCP).
Devices: This screen is used to discover, add or delete paired devices from the unit. The screen contains two main buttons (ADD and Del All). Pressing the ADD button will cause the unit to search for devices that are within the range of the Bluetooth signal. Once the devices are discovered they will be listed on the screen. Pressing the Del All button will cause all devices paired with the unit to be deleted.
PIN Code: Mic_Gain: The PIN or Passkey for the unit is (1234). Pressing the PIN Code on the Bluetooth Settings screen will result in the following screen being displayed. When keyboard screen appears the PIN Code can be changed with up to any seven digits. Use the keyboard to select the digits and press OK. Once the digits are selected and confirmed the new PIN Code will appear in the PIN Code on the Bluetooth Settings screen.
Camera Function/Rear Display/Setup Menu CAMERA FUNCTION 3. Press the unit’s front panel or front remote control MENU button and Rear Camera Function: select REAR. The unit is “camera ready.” Before access- 4. Use the rear remote control to start ing any camera features, you must install playback and various control functions. a rear video camera. When the camera is The rear remote should be pointed to not installed and the function is accessed the unit’s front panel.
SETUP MENU To access system settings, press the unit’s front panel or front remote control MENU button and select SETUP. The following screen will appear: Accessing Menu Items: Press the submenu feature you wish to adjust (General, Clock etc.). The submenu feature for adjustment will be highlighted. Pressing the feature will cause the adjustable parameters to be displayed. General Items: The General submenu feature allows you to configure the above items in the SETUP screen to your preference.
Screen: The Screen tab allows adjustment of video signals and the unit’s monitor. Refer to the following screen. Using the keyboard enter the time in (HH:MM) format. Then press AM or PM icon and press OK. The newly entered time will appear on the screen at the Set Time icon. Press the 12/24 Hour Format icon and the following screen will appear: The clock then can be set for either the 12 hour or the 24 format. Press the 12Hr or 24Hr icon and it will be selected.
Touch Screen Calibration: This Touch Screen Calibration adjustment is used to set the parameters of the touch screen to ensure that when the screen is pressed that it corresponds to feature the user is selecting. To calibrate the screen, first select the Touch Screen Calibration. Press the Yes icon and it will be selected. The following screen will appear: AUX IN: The Aux In allows the use to configure the unit to accept an auxiliary signal. Refer to the following screen.
The unit provides selection of two aspect ratios. The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display. In the aspect ratio of 16:9 the entire screen is extended horizontally. The extension ratio is the same at any point. Parental Control: Press the Parental Control icon and the following screen will appear: NOTE: The CANCEL icon can pressed if the parental control menu was entered accidentally.
Re-enter the new password again and press OK. The following screen will appear: The navigation software upgrade USB device should connected to the iPOD Interface USB port. Press the YES icon and the following screen will appear: The password is changed. NOTE: Record the password and keep it Press YES and the following screen will appear: in a safe place for future reference.
frequencies to optimize the audio output for your vehicle. Press the TREBLE FREQ icon and the following screen will appear: If a new version of the navigation software is found, pressing the YES icon will cause the unit to extract the software from the USB device and update the navigation software. Press the NO icon and the unit will return to previous mode prior to the upgrade.
Press the iPOD GAIN icon and the following screen will appear: Press the SIRIUS GAIN icon and the following screen will appear: The screen allows the iPOD audio signal to be amplified or attenuated. The signal can be adjusted from -7 to +7. Use the up and down scroll buttons to access the full range of the adjustment. Press the AUXIN GAIN icon and the following screen will appear: These screens allow the satellite radio audio signal to be amplified or attenuated. The signal can be adjusted from -7 to +7.
Press the TUNER GAIN icon and the following screen will appear: Version: Pressing the SOFTWARE VERSION icon The screen allows the tuner audio signal will display the following screen. to be amplified or attenuated. The signal can be adjusted from -7 to +7. Use the up and down scroll buttons to access the full range of the adjustment. Misc: The Misc (Miscellaneous) provides tab allows configuration of various unit settings. Refer to the following screen. The screen lists the software version for the unit.
AV2 Media Device AV2 Media Device (iPod) iPod Icon: Indicates the media device that is connected to AV2. When pressed the user is returned to the Main Menu.The media devices can consist of an iPod, USB device, or 3.5mm jack input. The USB device and the 3.5 mm jack input can be connected to the unit at the same time. When the iPod is connected the other two inputs are excluded. Bluetooth Icon: The icon will be light blue when paired to a device and gray when not paired.
SCAN Icon: Pressing this icon will play the first ten seconds of each track. Play/Pause Icon: Press to begin playback. Press the icon again to pause playback. Icon: Plays tracks in the directory in random order. Previous Icon: Press to advance to the next item contained in the menu. Repeat Icon: Press the icon (S ) during playback to repeat playback of the current song. This operation plays back the track currently being played. Press the icon (A )a second time to repeat all.
AV1/AV2 Input 2. Press the unit’s front panel or front Keyboard Icon: remote control MENU button and Press to directly access a video or an select AV1. audio track. When the icon is pressed a keyboard will appear. The user can then 3. Use the controls located on the device to start playback and other enter the desired feature number and control functions. press OK. The item will begin to play.
Navigation NAVIGATION The Navigation mode can be selected in a number of ways. The mode can be accessed from the Main Menu. The mode can also be selected by pressing the front panel NAV/DEST button. In addition the Navigation mode can be selected using the front remote control to access the Main Menu and then using the cursor keys to select the NAV icon. The following procedure provides a quick overview of the Navigation Mode.
5. Use the Map/Guide along Route function by proceeding to the highlighted route and drive while the software provides audible and visual guidance to your destination. 6. The software will advise you that you have arrived at your destination.
XM Satellite Radio (Optional) XM SATELLITE RADIO MENU XM Icon: Identifies the name of the satellite radio that is currently playing. When pressed the user is returned to the Main Menu. Antenna Icon: As the strength of the satellite radio signal increases, the number of illuminated segments will increase. Bluetooth Icon: The icon will be light blue when paired to a device and gray when not paired. Time Display: Displays the time as entered by the user in the SETUP Menu, clock function.
Jump Icon: Press jump to access the previous channel (i.e., switch between the current and previous channel). Previous Icon: Press to advance to the next previously available category. Keyboard Icon: Press to directly tune to a channel. When the icon is pressed a keyboard will appear. The user can then enter the channel number and press OK. The unit will tune to the channel and the programming on the channel will play.
SIRIUS Radio (Optional) SIRIUS SATELLITE RADIO MENU currently playing channel is now set into that preset memory position. The channel can now be recalled at any time by pressing that preset. Categories Icon: When the icon is pressed a category list is displayed. Categories group music by type such as jazz, rock, classical etc. Use the next arrow ( ) or the previous arrow ( ) to view the available SIRIUS categories.
Icon: Press jump access to the previous channel (i.e., switch between the current and previous channel). Previous Icon: Press to advance to the next previously available category. Keyboard Icon: Press to directly tune to a channel. When the icon is pressed a keyboard will appear. The user can then enter the channel number and press OK. The unit will tune to the channel and the programming on the channel will play.
To unlock the channel, press the channel icon and the lock will open. The following screen will appear: Enter the four digits you want to replace the default password. The following screen will appear: The channel will appear in the screen followed by the opened lock. This indicates that the channel is now accessible. Edit Password: Press the EDIT PASSWORD icon and the following screen will appear: Enter the same four digits again and press OK. The password is now changed to the new password.
Remote Control Remote Control Front 56
1. POWER Press this button to turn the unit on and off. 2. VOL+ Press this button to increase the volume. 3. VOLPress this button to decrease the volume. 4. INFO Press this button during DVD and CD playback to display playback information. This information consists of media type and the playback elapsed time. 5. SEL Press this button to display the Equalizer menu. Pressing the button again the display will return to the prior screen. 6. /BAND DVD Mode Press this button to stop DVD playback.
12. DVD Mode Press this button ( ) to search in a backward direction. Press this button ( ) to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 20 times the normal speed. 13. SUB-T Press this button to display and select the available subtitle languages. Each time the button is pressed, the subtitles change. iPod Video Mode Press this button to access videos located on the iPod. 14.
17. DVD Mode Press this button ( ) to return to the previous chapter or track. Press this button ( ) to skip to the next chapter or track. 18. TITLE Press this button to display the title of a DVD. DVD titles are a collection of video clips or chapters. DVDs generally contain multiple titles. 19. OK Press this button to confirm and implement a selected setting or menu option. Press this button to resume playback in various modes.. 20.
Remote Control Back 60
1. R-SRC Press this button to display the current operational mode on the front panel screen. 2. MUTE Press this button to mute the audio. Pressing the button again restores the audio to the previously set volume level. 3. _/_ _ Press this button to display a search screen that allows the user to enter a Title number, Chapter number or time value for a position on the DVD. A keyboard screen also appears on the front panel.. 4.
10. Press this button to use the repeat function for various playback modes. DVD Mode: Pressing this button consecutively will repeat the title, repeat the chapter, and disable the repeat function. CD Mode: Pressing this button consecutively will repeat the track and disable the repeat function. MP3 Mode: Pressing this button consecutively will repeat the track, repeat the folder and disable the repeat function. 11.
15. DVD Mode Press this button ( ) to search in a backward direction. Press this button ( ) to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 20 times the normal speed. 16. / Press this button to pause the DVD disk playback. Pressing the button again will resume normal DVD disc playback. 17. Press this button to stop DVD playback. 18. OK Press this button to confirm and implement a selected setting or menu option.
C 2009 Audiovox Electronics Corp.
