Installation guide

INSTALLING THE ADVEXL10 VIDEO SYSTEM - WIRING DIAGRAM

A/V Sources:

• DVD / CD

• USB Input

• HDMI1 Input (MHL/HDMI)

• HDMI2 Input (HDMI only)

• Media (e.g. iPod, iPhone, iPad)

• AV - Signal Harness (P/N 112-4094)

to the 3 RCA Jack Pigtail is used for

AV Input.

• AUX - AUX Input

• DTV

• Game

WIRING DIAGRAM

6 Pin Power/Dome Light Harness

(P/N 112-4270)

Optional Relay Box

FMDIRB

HDMI 2 Pigtail Harness (optional)

(HDIP1)

12 Pin AV Input Harness

(P/N 112-4094)

5 Pin AV Output Harness

(P/N 112-4260)

* 2 Pin FM Antenna

FM ANT.

1. Connect the dome light wires as shown on pages 10 and 11 of this

install manual.

2. Connect the input power wires of the 6 pin Power/Dome Light

Harness to the vehicle’s electrical system by tapping into an

accessory hot line and a good ground. NOTE: This connection

must be fused at the vehicle connection point.

3. Plug the 6 pin Power/Dome Light Harness into the unit in the

location shown.

4. If connecting to an external source, plug in the 12 pin AV Input

Harness (P/N 112-4094) in the location shown. Connect RCA

cables (not supplied) to the external source’s AV Output.

5. If connecting to a second screen AUX Input or head unit AUX

Input, plug in the 5 pin AV Output Harness (P/N 112-4260) in the

location shown and connect RCA cables (not supplied) to the AV

Input of the second screen or head unit.

6. Verify all system functions before permanently mounting the unit.

*NOTE: The antenna has been designed for optimal performance. When

installing the unit, position the antenna for best reception.

(HDMI only)