Installation guide

14
INSTALLING THE ADVDLX10 VIDEO SYSTEM
1. Connect the 6 pin harness to the unit and make the connections to
the vehicle.
2. Connect the red and black power wires of the Power Harness to
vehicle’s electrical system by tapping into an accessory hot line and
a good ground.
3. If connecting to an external source, connect the 5 Pin AV Input
Harness (112-4259 Blue Connector) to provide the AV signals input.
4. If connecting to an external source, connect the if used 5 Pin AV
Output Harness (112-4260 White Connector) to provide the AV
signals output.
5. Verify all system functions before nal mounting of the nished
assembly.
A/V Source Denitions:
• DVD - Built in DVD/USB
• AV - Signal Harness (P/N 112-4259 Blue Connector) to the 3 RCA
Jack Pigtail is used for AV input.
• AUX - AUX input (P/N 112B3227) 3.5mm jack to RCA Cable
NOTE: The antenna has been designed for optimal performance.
When installing the unit, position the antenna for best reception.
WIRING DIAGRAM
5 Pin AV input Harness
(P/N 112-4259 Blue Connector)
5 Pin AV output Harness
(P/N 112-4260 White Connector)
6 Pin Power/Dome Light
Harness
(P/N 112-4270)
Antenna for
Wireless FM Mod.
See Antenna Note
Optional Relay Box