User guide

2. DECT & FIXED CLI TELEPHONES
All DECT cordless handsets and/or fixed CLI telephones will ring when a call exists in Onsite Mode.
To answer a call using a DECT telephone press the Line key, if using a fixed CLI telephone simply lift the
handset.
When answered a speech message will identify the call type and flat number, the residents name may
also be displayed if it has been programmed into the telephone name/number memory.
When the alarm message is understood press the  key to open two-way speech with the caller.
During speech the resident’s VOLUME can be increased with the 1 key or decreased with 2 key.
To end the call using a DECT telephone press the # key followed by the Line key, if using a fixed CLI
telephone press the # key and replace the handset.
DECT
Cordless Handset Fixed CLI Telephone
Line Key
All instructions given in this manual assume a DECT cordless handset is being used with a Panasonic 308
exchange (PBX). If using a fixed CLI telephone simply lift/replace the handset instead of pressing the
Line Key.
For detailed information regarding DECT charging and other handset features see the manufacturers
booklets provided with each telephone.
CALLING A RESIDENT
Press the Line key, enter 8 1 and wait for the “Ready” prompt, then enter the flat number followed by
the  key.
MAKING INTERNAL CALLS BETWEEN
DECT HANDSETS
Press the Line key followed by the Extension Number (201-208).
Note; It is not possible to make internal calls to/from fixed CLI telephones.
MAKING EXTERNAL CALLS WITH DECT/FIXED CLI HANDSETS
Press the Line key, enter 8 2 and wait for the dial tone.
15 September 2009 FM0420 issue D Page 4
SILENTLOCK
WXYZTUVPQRS
MNOJKLGHI
DEFABC
0
98
7
6
5
4
321
R
INT MAIL
MUTEBOOKREDIALMENU
4040
ALARM
ERASESAVE
3
PLAY
2
DEF
1
ABC
9
WXYZ
8
TUV
7
0#
4
JKL
5
MNO
6
GHI
PQRS
*
REPLAY