User guide

31. SETTING 24 HOUR DOOR ENTRY CALLS
The Advent xt door entry system can be set-up to operate in 1 of 3 modes;
1. allow calls from door entry panels to all flats 24 hours a day
2. disable all calls during the evening/night (time period programmable by Engineer only)
3. disable calls to most flats during evening/night with some exclusions (user programmable)
If a call is made from a door entry panel to flat number which has calls disabled the visitor will
automatically be transferred to the Manager.
The start/end time period during which door entry calls are disabled can be set by an Engineer - see
back page of this manual for the for the time period set on your system. This can be overridden to allow
door entry calls to specific flats 24 hours a day if desired;
TO ENABLE 24 HR DOOR ENTRY CALLS: 1. Press the Line key and enter 8 1
2. Wait for the “Ready” prompt in the earpiece
3. Enter the code 8004 followed by the  key
4. Enter the flat number to have 24 hour door entry calls
enabled followed by the  key
5. Press the Line key to clear the connection
TO DISABLE 24 HR DOOR ENTRY CALLS: 1. Press the Line key and enter 8 1
2. Wait for the “Ready” prompt in the earpiece
3. Enter the code 8005 followed by the  key
4. Enter the flat number to have 24 hour door entry calls
disabled followed by the  key
5. Press the Line key to clear the connection
LIST 24 HR DOOR ENTRY CALLS: 1. Press the Line key and enter 8 1
2. Wait for the “Ready” prompt in the earpiece
3. Enter the code 8006 followed by the  key
4. All flats with 24 hour door entry calls enabled will be heard
5. Press the Line key to clear the connection
CLEAR ALL 24 HR DOOR ENTRY CALLS: 1. Press the Line key and enter 8 1
2. Wait for the “Ready” prompt in the earpiece
3. Enter the code 8007 followed by the  key
4. All flats with 24 hr door entry calls enabled will be cleared
5. Press the Line key to clear the connection
15 September 2009 FM0420 issue D Page 20