User guide

25. ACTIVITY MONITOR PANEL

Timed activity monitoring periods can be overridden to provide permanent monitoring via a wall

mounted Activity Monitor Panel. An LED representing each flat will be extinguished when activity is

detected, LED’s will remain illuminated for flats with no activity.

Each LED is labelled with the actual

flat number it represents.

Press the panel RESET button to

illuminate all LED’s.

LED’s will extinguish as activity is

detected in each flat.

Additional panels may be fitted for

schemes with more than 64 flats.

TO SET ACTIVITY MONITOR ON: 1. Press the Line key and enter 8 1

2. Wait for the “Ready” prompt in the earpiece

3. Enter the code 3004 followed by the  key

4. Press the Line key to clear the connection

TO REVERT TO TIMED MODE: 1. Press the Line key and enter 8 1

2. Wait for the “Ready” prompt in the earpiece

3. Enter the code 3005 followed by the  key

4. Press the Line key to clear the connection

26. USING THE INTRUDER FUNCTION

Individual flats can have the activity monitoring mode temporarily changed to an intruder alarm mode

when they are vacant or if the residents are away. Any movement detected in the flat via the PIR

detector will report an intruder alarm call rather than simply logging the activity.

Three special codes can be entered via the DECT telephone to select intruder mode related functions.

TO SET INTRUDER MODE: 1. Press the Line key and enter 8 1

2. Wait for the “Ready” prompt in the earpiece

3. Enter the code 3007 followed by the  key

4. Enter the flat number to be enabled followed by the  key

5. Press the Line key to clear the connection

TO RESET INTRUDER MODE: 1. Press the Line key and enter 8 1

2. Wait for the “Ready” prompt in the earpiece

3. Enter the code 3008 followed by the  key

4. Enter the flat number to be disabled followed by the  key

5. Press the Line key to clear the connection

LIST INTRUDER MODE FLATS: 1. Press the Line key and enter 8 1

2. Wait for the “Ready” prompt in the earpiece

3. Enter the code 3009 followed by the  key

4. All flats with intruder mode enabled will be heard

5. Press the Line key to clear the connection

15 September 2009 FM0420 issue D Page 16

RESET