Owner`s manual

64
TOUCH SCREEN CALIBRATION
The Touch Screen Calibration
adjustment is used to set the
parameters of the touch screen to
ensure that when the screen is pressed,
it corresponds to the feature that you
are selecting.
NOTE: Never use a pen or sharp object
to calibrate the touch screen as
this will damage the panel.
To calibrate the touch screen:
1. Press the Touch Screen Calibrate
icon. The following screen will
appear:
2. Follow the instructions on the
screen. Press and briey hold your
nger or a stylus to the center of the
target. Repeat as the target moves
to each corner of the screen and
nally to the center. The following
screen will appear:
3. If the screen is pressed, the new
calibration parameters will be
accepted. If the screen is not pressed
within thirty seconds, the new
parameters will be disregarded.
INFORMATION SCREEN
The Information Screen displays the
unit’s current software version and
Bluetooth version numbers.
Back Icon:
Press this icon to return to the First
Settings Screen.