Extended User Guide AWP10 All-in-One Printer
© DSGi, 2010 Hemel Hempstead Hertfordshire HP2 7TG Specifications subject to change without notice.
Table of contents 1 Printer Overview Components.......................................................................................................................................................................1 Control panel.....................................................................................................................................................................2 Configuring printer settings .......................................................................................
5 Copying Copying a document.....................................................................................................................................................26 Using the default settings to copy a document...............................................................................................26 Adjusting the settings and copying a document.............................................................................................27 Changing the number of copies of a document ....
ADVENT AWP10 All-in-One Printer 9 Product and Safety Specifications Specifications and features ........................................................................................................................................ 58 Print performance................................................................................................................................................... 58 Photo printing features....................................................................................
1 Printer Overview This printer lets you print, copy, and scan pictures and documents. In addition, this printer supports networking, letting you access the printer over a wireless (Wi-Fi) network.
Printer Overview Control panel 1 11 10 2 9 3 8 4 7 5 6 2 Feature Description 1 LCD Displays pictures, messages, and menus; lifts for easy viewing 2 Cancel button Stops the current operation and returns to the menu; returns to previous item when navigating menus 3 Home button Displays the main menu, and toggles between screens 4 Navigation buttons Used to navigate menus, scroll through pictures 5 Rotate button Changes the orientation of the displayed picture; changes the print outp
ADVENT AWP10 All-in-One Printer Configuring printer settings To set or change basic printer settings: 1. Press Home. 2. Press to select Printer Settings, then press OK. 3. Press to select one of the following settings: • Date and Time – Press OK, then press to select Year, Month, Day, Hour, or Minute. Press or to change the values; press OK when you are done. • Time to Low Power To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour.
Printer Overview Setting your printer as the default printer If you have more than one printer and your all-in-one printer is not the default printer, you may set it as your default printer. IMPORTANT: For all operating systems, if you connect your printer with a USB cable and with a wireless connection, your printer may be listed twice. Be sure to select the correct printer. The name of the printer that ends with a plus and four digits (+XXXX) indicates a wireless connection.
2 Networking Your Printer This section explains how to configure your wireless network settings. Connecting to a wireless network To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information. Before you connect You need: • a wireless router. • to determine whether your wireless router supports Wi-Fi Protected Setup (WPS). • to temporarily disable your firewall until the printer is successfully installed and communicating.
Networking Your Printer The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then displays the list in order of signal strength. For example: If there are more networks than can be shown on the LCD, a (page down) symbol appears in the bottom right of the display. If you don’t see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK. 4.
ADVENT AWP10 All-in-One Printer Connecting to a WPS wireless router If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN. To connect to a network using WPS: 1. Press Home. 2. Press to select Network Settings, then press OK. 3. With WiFi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard. 4.
Networking Your Printer Using the LCD keyboard When you need to enter letters or numbers, a keyboard appears on the LCD. Use the arrow keys to select the letters, numbers, and symbols, then press OK. On the control panel, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters. Press OK after each character. When you are done, select DONE, then press OK.
ADVENT AWP10 All-in-One Printer To set up your IP address on the printer: Press Home. Press to select Network Settings, then press OK. Press to select Advanced IP Address Setup, then press OK. Press OK again to continue. Select one of the following, then press OK: • Dynamic (DHCP) • Manual (Static) 6. If you selected Manual (Static), you are prompted to enter an IP address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry.
Networking Your Printer Printing the network configuration To print the current network configuration: 1. 2. 3. 4. Load plain paper into the printer. (See Loading plain paper, page 15.) Press Home. Press to select Network Settings, then press OK. Press to select Print Network Configuration, then press OK. Installing your printer on additional computers on the network To add your printer to another computer(s) on your network, install the ADVENT All-in-One Printer Software on each computer.
ADVENT AWP10 All-in-One Printer Adding a wireless network connection to a USB-connected computer You can change the way you connect to your printer at any time. Changing from USB to a wireless connection To change the printer connection type from USB to a wireless (Wi-Fi) network: If your printer is connected to a computer with WINDOWS OS: 1. 2. 3. 4. 5. 6. 7. 8. Unplug the USB cable from your printer and computer. On the printer control panel, press Home.
Networking Your Printer If your printer is connected to a computer with MAC OS: 1. 2. 3. 4. 5. 6. 7. 8. Unplug the USB cable from your printer and computer. On the printer control panel, press Home. Press to select Network Settings, then press OK. Press to select View Network Configuration, press OK, then confirm you have an IP address. Select Apple > System Preferences. Under Hardware, select Print & Fax. In the Print & Fax dialog box, click +. Select your printer from the list, then click Add.
3 Handling Paper For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers. For the best photo printing results, use KODAK Photo Papers, which are optimised to work with ADVENT All-in-One Printers, or photo papers designed for use on pigment-based inkjet printers. When handling photo paper: • Hold the paper by the edges; avoid placing your fingerprints on it.
Handling Paper Envelope sizes The printer accepts the following envelope sizes: • • • • • • C5 (16 x 23 cm / 6.7 x 9 in.) C6 (11 x 16 cm / 4.5 x 6.4 in.) DL (11 x 22 cm / 4.3 x 8.7 in.) US #7¾ (10 x 19 cm / 3.9 x 7.5 in.) US #9 (10 x 23 cm / 3.9 x 8.9 in.) US #10 (11 x 24 cm / 4.1 x 9.5 in.) IMPORTANT: Do not load envelopes with cutout or clear windows. Loading paper To load paper: 1. Lift the input tray. 2. Open the output tray, then pull out the extender until it is fully extended.
ADVENT AWP10 All-in-One Printer Loading plain paper The input tray capacity is 100 sheets of plain paper. To load plain paper: 1. Fan and stack the paper. 2. Make sure the left and right paper-edge guides are in the far left and far right positions, then insert the paper into the input tray. 3. Move the paper-edge guides until they touch the paper. adventprintersupport.custhelp.
Handling Paper Loading photo paper The input tray capacity is 20 sheets of photo paper. To load photo paper (smaller than 8.5 x 11 in.): 1. Remove any paper from the tray. 2. Insert the paper (short side first) into the center of the input tray with the logo side toward the tray and the glossy side toward you. IMPORTANT: If the photo paper is loaded the wrong way, print quality will be affected. 3. Move the paper-edge guides until they touch the paper. 16 adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer Loading envelopes The input tray capacity is 20 envelopes. IMPORTANT: Do not load envelopes with cutout or clear windows. To load envelopes: 1. Remove all paper from the tray. 2. Insert the envelope(s) into the tray with the flap away from you and the top of the envelope against the right side of the tray. 3. Move the paper-edge guides until they touch the envelope(s). adventprintersupport.custhelp.
4 Printing Print documents and lab-quality pictures on your printer. Printing documents To print a document: 1. 2. 3. 4. Open the document on your computer. Select File > Print. In the Print dialog box, select your ADVENT Printer. Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).
ADVENT AWP10 All-in-One Printer 7. Click Print. 8. When the odd pages have finished printing, remove them from the output tray. 9. Rotate the printed pages 180 degrees, and place them into the paper tray (printed side up). 10. Select File > Print. 11. In the Copies & Pages drop-down list, select Paper Handling. 12. In the Pages to Print drop-down list, select Even Only. 13. In the Page Order drop-down list, select Normal. 14. Click Print.
Printing Using default settings to print a picture To print a picture from a memory card using the factory default settings: 1. Load photo paper with the glossy side toward you (see Loading photo paper, page 16), and move the paper-edge guides until they touch the paper. 2. Insert the memory card into the memory card slot. memory card slot 3. Press or to select the picture you want to print. 4. Press Start to begin printing. The printer prints one 4 x 6 in. / 10 x 15 cm picture.
ADVENT AWP10 All-in-One Printer Changing the settings and printing pictures You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default. To print a picture or pictures using settings other than the default settings: 1. Load photo paper with the glossy side toward you (see Loading photo paper, page 16), and move the paper-edge guides until they touch the paper. 2. Insert the memory card into the memory card slot.
Printing Print Photos Option Settings Description Transfer All to PC -- To transfer all the pictures on the memory card to your computer, press OK then Start. (Your printer and computer must be connected with a USB cable.) Quantity 1 (default) to 99 The number of copies that print. Colour Colour (default) Prints full colour. Black & White Prints black and white (gray scale). Print Size 5 x 8 cm (3 x 2") 9 x 13 cm (5 x 3.
ADVENT AWP10 All-in-One Printer Printing tagged pictures Some digital cameras let you tag (or “mark”) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will be printed according to the default settings on your printer (unless otherwise specified by the tag from the camera). NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also “marked” or “DPOF”) functionality.
Printing Zooming and cropping pictures Use the zoom, rotate, and navigation buttons to select a portion of your picture for printing. To zoom and crop a picture: 1. Load photo paper with the glossy side toward you (see Loading photo paper, page 16), and move the paper-edge guides until they touch the paper. 2. Insert the memory card into the memory card slot. memory card slot 3. Press or to select the picture you want to crop, then press OK. 4. Press Zoom + to enlarge the picture on the LCD.
ADVENT AWP10 All-in-One Printer NOTE: Zooming and cropping does not change the saved picture on the memory card, but the edits are retained for reprinting until you remove the memory card or perform further edits. 7. When you are satisfied with the picture, press OK. The picture appears in the original view with a red box around the portion of the picture that will print. 8. Press Start to begin printing.
5 Copying You can copy documents and pictures with your all-in-one printer. The printer produces high–quality colour or black-and-white copies on a variety of paper types (see Paper types, page 13). Copying a document You can copy a document using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.
ADVENT AWP10 All-in-One Printer Adjusting the settings and copying a document To copy a document using settings other than the default settings: 1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass. 2. 3. 4. 5. Close the lid. Press Home. Make sure Copy Document is selected, then press OK. Press to select an option, then press or to change the setting.
Copying Copy Document Option Plain Paper Quality Setting Description Normal (default) Good quality output; prints faster than Best. Best The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal. Draft The fastest print speed, but the lowest quality. Photo Paper Quality Auto. (default) The printer detects photo paper in the paper tray and sets Best quality automatically.
ADVENT AWP10 All-in-One Printer 2. 3. 4. 5. Close the lid. Press Home. Make sure Copy Document is selected, then press Press Start to begin copying. or to select a number. Enlarging or reducing a document To enlarge or reduce the size of the copy: 1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass. 2. 3. 4. 5. 6. 7. Close the lid. Press Home. Make sure Copy Document is selected, then press OK. Press to select Copy Size.
Copying Darkening or lightening a copy To darken or lighten the copy: 1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass. 2. 3. 4. 5. 6. Close the lid. Press Home. With Copy Document selected, press OK. Press to select Brightness. Press to select a number below zero for a darker copy, or press number above zero for a lighter copy. 7. Press Start to begin copying. 30 adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer Copying a photograph You can copy a photograph using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies. Using the default settings to copy a photograph The default settings are either the factory default settings (see Resetting factory defaults, page 49), or defaults that you have set on the printer (see Save as Defaults, page 33). To copy a photograph using the current default settings: 1.
Copying Adjusting the settings and copying a photograph To copy a photograph using settings other than the default settings: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. 3. 4. 5. Close the lid. Press Home. Press to select Copy Photo, then press OK. Press to select an option, then press or to change the setting. Copy Photo Option Description Quantity 1 (default) to 99 The number of copies that print.
ADVENT AWP10 All-in-One Printer Copy Photo Option Plain Paper Quality Setting Description Normal (default) Good quality output; prints faster than Best. Best The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal. Draft The fastest print speed, but the lowest quality. Photo Paper Qualitya Auto. (default) The printer detects when you load photo paper and sets Best quality automatically.
Copying Changing the number of copies of a photograph To change the number of copies: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. 3. 4. 5. 6. 7. 34 Close the lid. Press Home. Press to select Copy Photo, then press OK. Make sure Quantity is selected. Press or to select a number. Press Start to begin copying. adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer Enlarging or reducing a photograph To enlarge or reduce the size of the copy: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. 3. 4. 5. 6. 7. Close the lid. Press Home. Press to select Copy Photo, then press OK. Press to select Copy Size. Press or to select the copy size. Press Start to begin copying. adventprintersupport.custhelp.
Copying Darkening or lightening a copy of a photograph To darken or lighten the copy: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. 3. 4. 5. 6. Close the lid. Press Home. Press to select Copy Photo, then press OK. Press to select Brightness. Press to select a number below zero for a darker copy, or press number above zero for a lighter copy. 7. Press Start to begin copying. 36 adventprintersupport.custhelp.
6 Scanning Scanning digitizes documents and pictures, and sends the digital files to your computer. When you scan, the digital file can: • Be saved in a format and location that you determine • Open in a third-party scanner software (such as Paint) Scanning from a software program on the computer gives you more options, but you can also scan from the printer control panel.
Scanning 5. Press to select an option, then press Scan Option Scan To Scan What Destination Save as Defaults Settings or to change the setting. Description USB-connected computer (default) The scanned file is sent to the USB-connected computer. Memory Card The scanned file is sent to the memory card in the memory card slot Name of computer (only if a computer is connected by wireless network) The scanned file is sent to the computer on the wireless network.
ADVENT AWP10 All-in-One Printer Scanning from the computer To scan a document or a picture on a computer: 1. Lift the scanner lid, and place the original document or picture face down in the right-front corner of the scanner glass. 2. Close the scanner lid. 3. Open the third-party scanner software and follow the directions for scanning. NOTE: You can scan multiple pictures simultaneously and save them as separate files.
Scanning On a computer with MAC OS: 1. 2. 3. 4. 5. 6. 7. 8. 40 Open ADVENT AiO Home Centre software. Select the Tools tab. Click Scan Application. Select what you want to scan, then click Preview. Click Scan or Scan All. Click Save As, and select where you want to save the file and in what format. Click Save. When you are finished scanning, click Cancel. adventprintersupport.custhelp.
7 Maintaining Your Printer Your printer requires little maintenance. However, Advent recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning. Except while cleaning the printer, keep the printer plugged into an AC power outlet. If you use a power strip, don't turn off the power strip. (The printer does not necessarily have to be turned on, but should be plugged in.
Maintaining Your Printer Cleaning the scanner glass and document backing The scanner glass can get smudged and minor debris can accumulate on the white document backing under the scanner lid. Periodically clean the scanner glass and document backing. CAUTION: Do not use harsh or abrasive cleaners on any part of the printer. Do not spray liquid directly on the glass. Do not use paper-based wipes on the document backing as they can scratch it.
ADVENT AWP10 All-in-One Printer 4. Dry the glass with a lint-free cloth. 5. Gently clean the document backing with a soft cloth or sponge, slightly moistened with mild soap and warm water. 6. Dry the document backing with a chamois or lint-free cloth. NOTE: If the document backing needs further cleaning, use isopropyl (rubbing) alcohol on a soft cloth, then wipe thoroughly with a cloth moistened with water to remove any residual alcohol. 7.
Maintaining Your Printer Replacing ink cartridges Your printer uses both black and colour ink cartridges. You can check the approximate ink levels on the LCD (see Checking ink levels, page 49). When an ink cartridge is out of ink, the printer LCD displays a message stating that the black or colour ink cartridge needs replacing. IMPORTANT: Do not use non-Advent brand or refilled ink cartridges. To replace an ink cartridge: 1. Make sure your printer is on. 2.
ADVENT AWP10 All-in-One Printer 3. Pinch the tab on the ink cartridge. 4. Lift the ink cartridge out of the printhead. 5. Remove the new ink cartridge from its bag. IMPORTANT: To prevent the printhead from drying out, insert the ink cartridge into the printhead immediately. adventprintersupport.custhelp.
Maintaining Your Printer 6. Remove the protective cap from the cartridge. 7. Insert the ink cartridge into the printhead. 8. Press down on the ink cartridge tab until you hear a click. 9. Close the printer access door. 46 adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer Updating the software and printer firmware Using the latest software and firmware helps ensure optimal performance of your printer. NOTE: Firmware is the software that runs on your printer. Updating if your printer is connected to a computer with WINDOWS OS To update the software: 1. Make sure that your computer is connected to the Internet. 2. Select Start > Programs > Advent > ADVENT AIO Printer Tools. NOTE: The path may vary depending on your operating system. 3.
Maintaining Your Printer Updating if your printer is connected to a computer with MAC OS To update the software: 1. 2. 3. 4. 5. Make sure that your computer is connected to the Internet. Select Finder > Applications > Advent AiO Home Center. Select the Tools tab. Select Check for Software Updates. If there are software updates, follow the on-screen instructions. To update the firmware: 1. Make sure that your computer is connected to the Internet. 2.
ADVENT AWP10 All-in-One Printer Monitoring and adjusting printer performance From the control panel, you can perform tasks to help keep the printer functioning well. Checking ink levels To check the ink levels: 1. Press Home. 2. Press to select Maintenance, then press OK. 3. With Check Ink Levels selected, press OK. The LCD shows approximate levels of ink in the cartridges so you know when it’s time to order replacement cartridges.
Maintaining Your Printer Replacing the printhead IMPORTANT: Replacing the printhead is not a regular maintenance procedure. Replace the printhead only if you receive a new printhead from Advent. To replace the printhead: 1. Make sure your printer is on. 2. Lift the printer access door, and wait for the carriage to move to the access position. 3. Remove both ink cartridges and set them aside. 50 adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer 4. Unlatch the used printhead by lifting the button in the center of the carriage. 5. Lift the used printhead out of the carriage. 6. Remove the new printhead from its bag. CAUTION: Do not touch the copper contacts on the printhead, as doing so may damage the printhead. adventprintersupport.custhelp.
Maintaining Your Printer 7. Remove the plastic protective cap. Copper contacts 8. Place the new printhead into the carriage. IMPORTANT: Be careful not to scratch the copper contacts while inserting the printhead. 9. Push firmly against the target label of the printhead until you hear a loud snap. 52 adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer 10. Insert the black ink cartridge into the printhead. 11. Press down on the ink cartridge until you hear it click into position. 12. Repeat steps 10 - 11 for the colour ink cartridge. 13. Close the printer access door. The printer detects the new printhead. Follow the instructions on the LCD to calibrate your printer. adventprintersupport.custhelp.
8 Troubleshooting Basic troubleshooting Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Wait five seconds. Turn on the printer. Use the following information to help troubleshoot problems with your printer. Problem Possible Solutions Printer does not power on • Make sure you are using the power cord that came with your printer.
ADVENT AWP10 All-in-One Printer Problem Possible Solutions Print quality • For best results, use paper with the COLORLOK Technology logo on the package. • Make sure the paper is loaded correctly. See Loading paper, page 14. • Clean the printhead: – Press Home. – Press to select Maintenance, then press OK. – Press to select Clean Printhead, then press OK. • Calibrate the printer: – Press Home. – Press to select Maintenance, then press OK. – Press to select Calibrate Printer, then press OK.
Troubleshooting Getting help on the Web For more troubleshooting information: Get help with wireless networking. adventprintersupport.custhelp.com/app/go/inkjetnetworking Search our knowledge base for answers to questions you may have about your printer. adventprintersupport.custhelp.com Download the latest firmware and software for optimal printer performance. adventprintersupport.custhelp.
ADVENT AWP10 All-in-One Printer Status lights The status lights indicate the condition of the printer. There are two status lights on the printer, one that indicates power, the other indicates Wi-Fi status. Power light Power light What it means Off • The printer is turned off. – Press the on/off button to turn on power. • The printer does not have power. – Make sure that the power cord is plugged into the back of the printer and into an electrical outlet, and that the electrical outlet has power.
9 Product and Safety Specifications The following specifications are subject to change without notice. Specifications and features Print performance ISO/IEC 24374 ESAT 6 ipm ISO/IEC 24374 ESAT 4 ipm Print technology Continuous-tone, thermal inkjet Print quality modes Draft, Normal, and Best on plain paper Photo quality mode on photo paper Photo printing features Quantity 1 to 99 Print sizes 5 x 8 cm (3 x 2 in.) 9 x 13 cm (5 x 3.5 in.) 10 x 15 cm (6 x 4 in.) 10 x 18 cm (7 x 4 in.) 13 x 18 cm (7 x 5 in.
ADVENT AWP10 All-in-One Printer Copy photo features Colour Black-and-white or colour Quantity 1 to 99 copies Copy sizes 5 x 8 cm (3 x 2 in.) 9 x 13 cm (5 x 3.5 in.) 10 x 15 cm (6 x 4 in.) 10 x 18 cm (7 x 4 in.) 13 x 18 cm (7 x 5 in.) 10 x 30 cm (12 x 4 in.) (Panoramic) 20 x 25 cm (10 x 8 in.) 21.6 x 28 cm (11 x 8.5 in.) or A4 Quality Automatic Brightness – 3 to + 3 Scanning features Scanner type Contact Image Sensor (CIS) Maximum scan size 21.6 x 29.7 cm / 8.5 x 11.7 in.
Product and Safety Specifications Connectivity Protocols supported USB 2.0 High Speed; DPOF Devices supported WINDOWS OS-based and MACINTOSH Computers, memory cards (SD, MS/Duo, MMC, SDHC) Image Formats supported Image printing supports JPEG (EXIF v2.2); does not support progressive JPEG format Number of USB ports One rear device port (high speed) Protocols supported USB 2.0 High Speed (for connection to computer only), DPOF (Tagged image printing) Wi-Fi Technology 802.
ADVENT AWP10 All-in-One Printer System requirements Computer with WINDOWS OS Computer Minimum Operating system WINDOWS 7, VISTA, or XP (SP2 or later) CPU INTEL CELERON Processor Clock speed 1.2 GHz Memory 512 MB RAM Available hard disk space 500 MB available Interface USB 2.0 High Speed Removable drive CD-ROM Computer with MAC OS Computer Minimum Operating system MAC OS X 10.4.8 or later CPU PowerPC G4, G5, or INTEL-based Mac Clock speed 1.
Product and Safety Specifications Paper sizes supported Plain paper A4 (21 x 30 cm / 8.3 x 11.7 in.) A5 (15 x 21 cm / 5.8 x 8.3 in.) A6 (11 x 15 cm / 4.1 x 5.8 in.) B5 (18 x 25 cm / 6.9 x 9.8 in.) US Executive (18 x 27 cm / 7.3 x 10.5 in.) US Letter (22 x 28 cm / 8.5 x 11 in.) US Legal (22 x 36 cm / 8.5 x 14 in.) Custom sizes from 10 to 22 cm / 4 to 8.5 in. wide and 15 to 36 cm / 6 to14 in. long Labels A4 (21 x 30 cm / 8.3 x 11.7 in.) US Letter (22 x 28 cm / 8.5 x 11 in.
ADVENT AWP10 All-in-One Printer Safety information ADVENT AWP10 All-in-One Printers are Class 1 LED Products. • Always follow all warnings and instructions marked on the product. • Use only the power source indicated on the product regulatory label. • Use only the power cord that comes with the product (or an approved power cord greater or equal to H05W-F, 3G, 0.75mm2). Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.
Product and Safety Specifications LCD screen safety • Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners. • If the LCD screen is damaged, contact Advent immediately. If any of the solution from the display gets on your hands, wash then thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush your eyes immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.
ADVENT AWP10 All-in-One Printer Waste electrical and electronic equipment labeling In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities for recycling program information. ENERGY STAR® Qualified All-in-One Printer To conserve energy, this printer will enter a reduced power (sleep) mode automatically after 1 hour. You can adjust the delay time (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
Product and Safety Specifications Warranty Information Manufacturer's Limited Warranty Advent warrants Advent consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Index A access door, location, 1 B back button, location, 2 C cancel button, location, 2 cleaning document backing, 42 printer, 41 scanner glass, 42 components, printer, 1 computer requirements, 61 configuring printer settings, 3 connecting to a wireless network, 5—10 additional printer, 10 from USB, 11—12 printer on additional computers, 10 control panel features and descriptions, 2 location, 1 copy document features, 58 copy photo features, 59 copying, 26—36 documents, 26—30 adjusting settings, 27—28 chan
Index I image formats supported, 60 index card stock sizes, 62 ink cartridges, replacing, 44—46 ink levels, 49 IP address setting up, 8 viewing, 9 iron-on transfers, sizes, 13, 62 K keyboard on LCD, using, 8 L label sizes, 62 language, setting, 3 LCD, location, 2 lightening copies documents, 30 photos, 36 loading paper input tray envelopes, 17 photo paper, 16 plain paper, 15 M MAC address, viewing, 9 marked images, printing.
Index R recycling printer or supplies, 41 red box around image on LCD, 25 reducing copies documents, 29 photos, 35 regulatory compliance European, 64 removing the printhead, 51 replacing ink cartridges, 44—46 rotate button, 24 rotate button, location, 2 U USB connection, changing to wireless, 11—12 USB port, location, 1 W warranty information, 66 ink, 59 printer, 60 printhead, 60 Web support networking, 6, 8, 11, 54, 56 printer support, 7, 56 system requirements, 56 WEP, 6 Wi-Fi connectivity LED, location
