Installation Manual

HEADREST SYSTEM WIRING DIAGRAM
Master Monitor Satellite Monitor
OPTIONAL FM DIRECT CONNECTION
FM ANTENNA
INTERFACE BOX
Relay Box for wireless FM Modulator
FMDIRB
DC
IN
2 PIN DC POWER CABLE
AV Input
AV Output
See the instructions supplied with the FMDIRB for installation.
12 Pin AV Adapter Cable
GAME MODULE
OPTIONAL MVGP1 (GAME PACKAGE)
112-4289
HRM2
GREEN
112-4288
HRM1
PINK
112-4291
HRS2
BLUE
112-4290
HRS1
YELLOW
Connect to external source such
as Blu-ray player, game console
or multi-media head unit output.
MVGP1
*
* Use the supplied double sided tape to secure
the game module to the interface box.
FMM
**
** NOTE: Power cable must be fused at the power source to avoid
wiring and vehicle damage in the event of a short circuit.
6
7
7“ ELECTRONICS INSTALLATION/REPLACEMENT GUIDE
2
a)
M1 BLUE headrest connector
b)
Connect HRM2/HRS2 WHITE cable connector to
M2 WHITE headrest connector
Connect HRM1/HRS1 BLUE cable connector to
a
b
4
Rotate the screen up and move the locking tab
to the right to lock the monitor into the headrest
tray.
Installation
Install Monitor Unit To Headrest
NOTE: Switch off the ACC power during cable and unit installation. Failure to do
so may damage the unit.
1
a) Master/Satellite monitor headrest
cable (HRM1/HRS1) 8 Pin connector (BLUE)
b) Master/Satellite monitor headrest
cable (HRM2/HRS2) 9 Pin connector (WHITE)
a
b
3
a) Master/Satelite monitor headrest cable
(HRM1/HRS1) 8 Pin connector (BLUE)
b) Master/Satelite monitor headrest cable
(HRM2/HRS2) 9 Pin connector (WHITE)
e) Insert the monitor into the monitor tray.
Make sure that the cables are not trapped
between the monitor and the monitor tray
f) Install Screws (x4)
CAUTION: Do not use a power driver. HAND
TIGHTEN ONLY!
c) Connect HRM1/HRS1 BLUE cable
connector to M1 BLUE headrest connector.
d) Connect HRM2/HRS2 WHITE cable
connector to M2 WHITE headrest connector.
g) Rotate the screen UP and move the locking
tab to the right to lock the monitor into the
headrest tray.