Owner’s Manual

12
8” MONITOR REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
HR8MA1
System Sub-Menus
1. Press the SYSTEM MENU button on the
Remote Control (Figure 6) or long press
the Home/Menu Select button on the
front panel of the monitor (Figure 7) to
display the SYSTEM MENU.
2. Use the UP and DOWN direction buttons
to select and enter the desired SYSTEM
SUB-MENU:
• PICTURE
• WFMM (Only M1 mode)
• LANGUAGE
• DEFAULT DVD
• IR TRANSMITTER
• SMART STREAM
• EXIT
NOTE: Selected items in the SYSTEM
MENU and the Sub-Menus will be
highlighted in orange.
3. Use the UP, DOWN, LEFT and RIGHT
direction buttons to adjust or select an
item in the Sub-Menu screen and then
press the OK button on the Remote
Control (Figure 6) or press the HOME /
MENU SELECT button (Figure 7).
4. To exit the SYSTEM MENU screen or the
SYSTEM SUBMENU screens and return
to the MAIN MENU at anytime, press the
SOURCE SRC button on the Remote
Control or the SOURCE (S button on
the front panel.
PICTURE CONTROL
Picture Control Menu
PICTURE CONTROL from the Front
Panel
:
1. Press and hold the HOME/ MENU SELECT
button on the front panel of the unit to
show the SYSTEM MENU.
2. Use the UP and DOWN direction buttons
to select PICTURE CONTROL (Figure 8)
and press the HOME / MENU SELECT
button to enter the sub-menu.
HR8MA1 SYSTEM SETUP SUBMENUS
Figure 8
Figure 9
WFMM Channel/Frequency Menu
3. Use the UP and DOWN direction buttons
to select one of the ve selections in the
Sub-Menu (Brightness, Contrast, Color,
Tint and Reset).
4. Use the LEFT and RIGHT direction
buttons to adjust the picture setting
levels.
NOTE: Levels are set from “0” to “32” for
Brightness, Contrast and Color. The level
for Tint is set from “-16” to “+16” . There
is no Tint Control in PAL Mode.
5. Select Reset to return the picture setting
controls to the factory default settings.
1. Select “M1” or “M2” on the Remote
Control.
2. Press the SYSTEM MENU or PIX button to
enter PICTURE CONTROL then press the
OK button to enter the sub-menu.
3. Use the UP and DOWN direction buttons
to select one of the ve selections in the
Sub-Menu (Brightness, Contrast, Color,
Tint and Reset).
4. Use the LEFT and RIGHT direction
buttons to adjust the picture setting
levels.
NOTE: Levels are set from “0” to “32” for
Brightness, Contrast and Color. The level
for Tint is set from “-16” to “+16”. There
is no Tint Control in PAL Mode.
5. Select Reset to return the picture setting
controls to the factory default settings.
FM CHANNEL
Wireless FM Modulator (WFMM
Channel Select from the Front Panel
1. Press and hold the HOME/ MENU SELECT
button on the front panel of the unit to
show the SYSTEM MENU.
2. Use the UP and DOWN direction
buttons to select WFMM (Wireless
FM Modulator) and press the HOME
/ MENU SELECT button to enter the
sub-menu.