User Guide

27
SOURCE FEATURE*
AV1
The AV1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the
AV1 inputs, turn the ADV35 on and press the S (source) button on the ADV35 or the Source button on the remote control until "AV1" is
displayed on the screen. Turn the video source component on with its power button or remote control. The ADV35 is now ready to play
the audio and video signals from the source connected to AV1 input ( .
AV2/TV
The AV2 input may be connected to a Video Cassette Player (VCP), Video game system or any other audio / video device. To access the
AV2 inputs, turn the ADV35 on and press the S (source) button on the ADV35 or the source button on the remote control until AV2/TV is
displayed on the screen.
AUX/Game
The ADV35 will accept audio / video input through the rear mounted RCA jacks. The audio / video device could be a video game system,
video camera, iPod (through iPod cable interface) or other input device.
Notes: 1. The AUX/Game input is a shared input connector (Priority AUX); when an AUX input is connected, it will
automatically disable the game input.
2. Similarly, If an iPod is to be used, such as the Apple iPod 30, connect one end of the iPod adapter cable (purchased
separately) to the AUX/Game connector via the 3 RCA jacks on the ADV35, and connect the other end of the cable to
the iPod connector. The iPod adapter cable can be purchased from the vendor where the ADV35 was sold. When
connected, the game input is disabled.
AV Out
The ADV35 provides an AV output for optional video monitor(s). This output will provide the AV signals that duplicate the picture/audio
being processed by the ADV35 to an additional monitor or video display. Please see your installer for more information.
*Note: AV1 and AV2 sources are available only if pre-installed during your video product installation.
optional accessory cable part number 8010730 required)