User Guide
6101 Lake Ellenor Drive • Orlando, Florida 32809
Tel: 800/ADVANTOR • 407/859.3350 • Fax: 407/859.5205
http://www.advantor.com
Specifications and part numbers are subject to change without notice.
SmartAudio Module
Adds audio detection capability to the Advantage
®
plus system, while screening out
many common environmental sounds. Continuously scans its audio channels, and
analyzes sounds according to a predetermined set of audio algorithims or patterns. If
a noise is determined to be a possible intrusion, the monitoring console is contacted.
When a sound is deemed environmental, there is no call to the central station. Each
Base Module can interface and control up to 8 SmartAudio or ListenIn Modules.
Dimensions
PCB Foot Print
• 7.25" W x 8.5" H (17.41cm x 21.59cm)
Audio
• DSP processes 8 audio channels for intrusion
detection
• Each audio channel assignable to any of 8 separate
arming partitions
• Sensitivity adjustable from central station
• 16 audio sensor inputs (two per audio channel)
• Programmable audio sensor self-test at system
arming and disarming
• Balanced audio output to Base Module
• Audio sensors annunciate Chime Mode & Entry/Exit
Alert
Stored Audio
• One second pre-impact
• Four seconds post-impact, followed by live audio
Operating Environment
• 0° F to 122° F (-18° C to 50° C)
Auxiliary Inputs
• “No AC” and “Low Battery” inputs to monitor the
status of an optional APS12V1A-S Advantage
PowerSource
• Tamper input
Part Numbers
ADV SAM Smart Audio Module with
Installation Kit
APS12V1A-S Power Supply, 12VDC
AVR CHAS/SUR115 Standard Enclosure, Internal
Transformer (120VAC) and AC
“Level 2” surge protection
AVR CHAS/SUR220 Standard Enclosure, Internal
Transformer (220VAC) and AC
“Level 2” surge protection
40003401 Enclosure Tamper Switch Kit
90228102 PCB, Smart Audio Module
90237200 Standard Enclosure with Lock
and Key
90258200 Attack Enclosure with Lock and
Key
08610416 Transformer, 16.5VAC, 50VA,
Plug-In
09820452 SmartAudio Module Installation
Instructions
Power Requirements
• 200 mA at 12 VDC (from Base Module or optional
APS12V1A-S Advantage PowerSource)
Communications
• Base Module RS-485 Communication link up to 2,000
feet maximum with 22AWG shielded twisted pair
cable
Mounting
• Mounts locally inside Base Module enclosure or
remotely inside optional enclosure up to 2,000 ft. from
Base Module
P/N 09820486, Rev. A
6/98