User Guide

6101 Lake Ellenor Drive • Orlando, Florida 32809
Tel: 800/ADVANTOR • 407/859.3350 • Fax: 407/859.5205
http://www.advantor.com
Specifications and part numbers are subject to change without notice.
Coverage Information
The coverage pattern of the Advantage AudioSensor is
basically a heart-shaped envelope. That is, the
AudioSensor is most sensitive to sounds directly in front
of it, with the sensitivity decreasing at the sides and to
the rear.
For example, a properly calibrated Advantage
AudioSensor mounted on a post in the center of an
open room could have a coverage pattern extending
approximately 50 feet in front, 40 feet to each side, and
15-20 feet to the rear.
NOTE: The stated distances are for reference only and
DO NOT establish minimum or maximum coverage
areas. The AudioSensor’s location, mounting surface,
and other environmental conditions determine an actual
and workable coverage pattern and distance. Using in a
listen-in only application may enhance the coverage
area.
Dimensions
Size: 3.25" L x 1.68" W x 0.75" D
(8.26cm x 4.27cm x 1.91cm)
Weight: 1.56 oz (44g)
Housing: ABS plastic, off-white
Operating Environment
0° F to 122° F (-18° C to 50° C)
Sensors
Advantage plus AudioSensor
Dimensions
Size: 3.25" L x 1.68" W x 0.75" D
(8.26cm x 4.27cm x 1.91cm)
Weight: 1.56 oz (44g)
Housing: ABS plastic, off-white
Operating Environment
0° F to 122° F (-18° C to 50° C)
Power
Requirements
Input Voltage: 10.2
VDC – 14 VDC
Input Current: 5 ma
typical
Tamper Switch
500ma at 30 VDC
Mounting
Wall mount
Wiring via 6-position
Panduit style connector
Part Numbers
AUDIOSENSOR AudioSensor Complete
07543002 PCB, AudioSensor
40013401 AudioSensor/GBD Backplate to
mount to single gang box
(package of 6)
49001501 Ceiling Mounting Bracket
09001101 Housing
Advantage plus GlassBreak
Power
Requirements
Input Voltage: 10.2
VDC – 14 VDC
Input Current: 5 ma
typical
Tamper Switch
500ma at 30 VDC
Mounting
Wall mount
Wiring via 6-position
Panduit style connector
Part Numbers
GBD-ST Glass Break Sensor Complete
90256100 PCB, Glass Break Sensor
40013401 AudioSensor/GBD Backplate to
mount to single gang box
49001501 Ceiling Mounting Bracket
09001101 Housing
P/N 09820489, Rev. A
6/98