User Guide

6101 Lake Ellenor Drive • Orlando, Florida 32809
Tel: 800/ADVANTOR • 407/859.3350 • Fax: 407/859.5205
http://www.advantor.com
Specifications and part numbers are subject to change without notice.
TelPlus Module
For a greater level of security, the TelPlus Module adds a second communication channel,
either a dial with line supervision, or a dedicated line to the Advantage
®
plus system. Dual line
capability to meet NFBA 72 4-2.3-2.1.6.
Dimensions
PCB Foot Print
2.625" W x 2.125" H (6.67cm x 5.40cm)
Telco Configurations
Dial Line
RJ31X jack
Pulse or DTMF dialing
Integrated cut line supervision
Dedicated Line
RJ31X jack
Operating Environment
0° F to 122° F (-18° C to 50° C)
Power Requirements
12 Volts DC (from Base Module)
0 mA in Normal Standby mode, 45 mA in transmit
mode
Mounting
Plugs into the J9 connector on the Base Module
Part Numbers
TEL PLUS TelPlus Module Complete with
Installation Kit
90227101 PCB, TEL PLUS Module
09820454 TEL PLUS Module Installation
Instructions
P/N 09820484, Rev. A
6/98