User`s manual

47
EasyConfig is done. When the client has adopted EasyConfig the setting, the EasyConfig LED
will be steady on. Except push button on evaluation board, user may enable the request by click
“Do EasyConfig (Button)” on web page.
Beside Button mode, user may select Q&A mode for EasyConfig. If this is first time
configuration of EasyConfig Q&A mode in AP (“Q&A Installed” item indicated as “no” in current
key info table of AP EasyConfig web page), user must check “First Time Configuration”
checkbox, and then input the answers for Question 1 and 2 in web page. After answers are
given, click “Do EasyConfig (Q&A)” button, it will begin to search for EasyConfig Q&A mode
AP. If any AP is found, the EasyConfig negotiation will be proceeded and the setting will be
adopted automatically in AP and client when EasyConfig is done.
Please note, if it is first time configuration for Q&A mode, user must remember which question
selected and which answer input because AP will save the client question and answer into
Flash memory and check it when any other client requests Q&A mod EasyConfig hereafter.
8186 System Configuration
In this section, it will show you WLAN EasyConfig setting in config file. You could find this config
file in 8186 CMK package, and you may edit the value as you want. Then, you could re-build the
firmware image with the setting you modified, and upload it to WLAN evaluation board.
Keyword Meaning Value
DEF_ WLANn_EASYCFG_ENABLED
WLANn_EASYCFG_ENABLED
Enable/Disable EasyConfig 0 – disable, 1 – enable
DEF_ WLANx_EASYCFG_MODE
WLANn_EASYCFG_MODE
Indicate which configure
method used
1 – button mode, 2 – QA
mode, 3 – button+QA
DEF_WLANn_EASYCFG_ALG_REQ
WLANn_EASYCFG_ALG_REQ
Indicate which encryption
algorithm will be proposed
when used in client mode
4 – WPA-TKIP,
32 –WPA2-AES
DEF_WLANn_EASYCFG_ALG_SUPP
WLANn_EASYCFG_ALG_SUPP
Indicate which encryption
algorithms could be accepted
for client request
4 – WPA-TKIP,
32 –WPA2-AES,
36 – Both WPA-TKIP
and WPA2-AES
DEF_WLANn_EASYCFG_SCAN_SSID
WLANn_EASYCFG_SCAN_SSID
SSID used for EasyConfig.
Please note, EasyConfig AP
and client must be set with the
same value
SSID text string up to 31
characters
Please note, DEF_XXX_XXX means these MIBs will be stored as default settings. Others will