User`s manual

19
2.2 Setting up Internet Access
This section describes how to setup Wireless Router Internet access through DSL or cable
modem.
For Windows 9x/2000
a) Click “Start” and select “Settings
Control Panel
Internet Options”.
b) Select “Connectiontab then click “Setup” button.
c) Select I want to set up my Internet connection manually, or I want to connect
through a local area network (LAN)” then click Next”.
d) Select I connect through a local area network (LAN) then click Next”. Make
sure all the boxes on the following LAN Internet Configuration screen are unchecked.
e) Select “No” when “Do you want to set up an Internet mail account now?” prompts
out.
f) Click “Finish” to end setup process.
For Windows XP
a) Click “Start and select “Control Panel
Network and Internet Connections.
b) Select “Set up or Change your Internet Connection.
c) Click Connectiontab, then click the Setupbutton. Click Cancelin the pop-up
Location Information window.
d) Click “Next” in the “New Connection Wizard” window.
e) Select “Connect to the Internetthen clickNext”.
f) Select “Set up my connection manually” then click “Next”.
g) Select Connect using a broadband connection that is always on then click
Next”.
h) Click “Finish” to complete the setup process.
For Macintosh Clients
To access Internet via wireless router on Macintosh system, the set up procedures are
showing below:
a) Open the TCP/IP Control Panel.
b) Select Ethernet from the Connect via pop-up menu.
c) Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID
field can be left blank.
d) Close the TCP/IP panel and save your new settings.