User`s manual

• If you decide to use IP address from Wireless Router, select “Obtain an IP

address automatically”.

• If you decide to use the IP address you are desired, select “Use the

following IP address”. Make sure enter correct addresses in “IP Address”

and “Subnet Mask” fields.

• You must set Wireless Router’s IP address as “Default Gateway”.

• If the DNS Server fields are empty, select “Use the following DNS server

addresses” and enter the DNS address is provided by your ISP, then click

“OK”.

Checking TCP/IP Settings for Windows XP

a) Click “Start”, select “Control Panel 



 Network Connection” and right click “Local

Area Connection” then select “Properties”. The window shown as below will

appear.

b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window shown as

below will appear.