User`s manual

73
 Encryption Type: For Open & Shared authentication modes, the available
encryption types are
None and WEP. For WPA, WPA2, WPA-PSK and
WPA2-PSK authentication modes, the available encryption types are TKIP and
AES.
 Config Methods: This attributes contains the config methods supported and
enabled by the selected Registrar.
 Device Password ID: Device Password ID indicates the method or identifies the
specific password that the selected Registrar intends to use.
 Selected Registrar: Selected Registrar indicates if the user has recently activated a
Registrar to add an Enrollee.
 State: This attribute is used to indicate the current configuration state. This attribute
is either “
Un-Configured” or “Configured”.
 Version: This attribute is the specified WPS version.
 AP Setup Locked: AP Setup Locked indicates if AP has entered a setup locked
state.
 UUID-E: UUID-E is the universally unique identifier (UUID) generated by the
Enrollee.
 RF-Bands: RF Bands indicate the available RF bands.
[Configure WPS Profiles]
The user can configure WPS profile with either PIN method or PBC method.
 PIN Method:
Step 1  The Registrar enters the pin code generated by station.
Step 2  Click the “PIN” button.
 PBC Method:
Step 1  Click the “PBC” button within 2 second while the Registrar clicks the
button.
[Manage WPS Profiles]
The Received WPS profiles are listed in the lower frame, and the listed WPS profile attributes
are SSID, MAC address, authentication type, and encryption type.
 WPS profile detail information: Selecting a profile then clicking the “Detail” button
brings up the WPS profile detail information dialog.
 Connect with WPS Profile: Clicking the “Connect” button will connect to AP with the
select WPS profile.
 Rotate WPS profile: If there are more than two WPS profiles, clicking the “Rotate”
button will rotate to next profile and connect to AP with this profile. If the connection
can’t be made successfully, station will perform the WPS profile rotation repeatedly.