User`s manual

48
Device Password ID: Indicate the method or identifies the specific password that the
selected Registrar intends to use. AP in PBC mode must indicate 0x0004 within two-minute
Walk time.
Selected Registrar: Indicate if the user has recently activated a Registrar to add an Enrollee.
The values are “
TRUE” and “FALSE
State: The current configuration state on AP. The value are “
Unconfigured” and “Configured”.
Version: WPS specified version.
AP Setup Locked: Indicate if AP has entered a setup locked state.
UUID-E: The universally unique identifier (UUID) element generated by the Enrollee. There is
a value. It is 16 bytes.
RF-Bands: Indicate All RF bands available on the AP. A dual-band AP must provide it. The
values are “
2.4GHz and “5GHz
3.1.8 About
About function display the wireless card and driver version information.