User`s manual

43
(2) Timeout Value represent that it disconnect automatically after some seconds. The value
is integer. The integer must be between 0~65535. It represents that it always connects if
the value is zero. Default value of Timeout Value is 60 seconds.
(3) ClickApply” button. The result will look like the below figure.
Describe “DLS Status” as follow:
(1) As the up figure, after configuring DLS successfully, show MAC address of the opposite
side and Timeout Value of setting in “DLS Status”. In DLS Statusof the opposite side,
it shows MAC address of itself and Timeout Value of setting.
(2) Display the values of “DLS Statusto “Direct Link Setup as follow: