User's Manual

51 TREK-572/303 User Manual
Chapter 6 Software Demo Utility Setup
For example. Selecting WIFI module. I can see the WIFI module is enable.
Opening Peripheral Power
If you want close the specified peripheral power, following the instruction:
1. Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe"
2. Selecting module, For example "WIFI"
3. Selecting "Set" radio button
4. Press "Enable/Disable" combo box and selecting "Enable"
5. Press "Apply" button
6. You should see the peripheral power is on
Closing Peripheral Power
If you want close the specified peripheral power, following the instruction:
1. Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe"
2. Selecting module, For example "WIFI"
3. Selecting "Set" radio button
4. Press "Enable/Disable" combo box and selecting "Disable"
5. Press "Apply" button
6. You should see the peripheral power is closed
Note! System need a little time to enable peripheral.