User's Manual

43 TREK-572/303 User Manual
Chapter 6 Software Demo Utility Setup
Writing Data
1. Selecting "J1587" page as below figure
2. Filling the J1587 data prepare to send
3. Press "Write" button to send J1587 data as above figure
4. You should see the data on the receiver
Testing Message Filter
1. Selecting "J1587" page as below figure
2. Enter specified MID to filter
3. Press "Add MID" button to add the rule to filter
4. You should see the filter was applied on the bus
5. The system ignores all MID is not on the list