User's Manual
Table Of Contents
- WISE-2834
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 5 Software Programming (Node- RED)
- 5.1 Terminology Definition
- 5.2 System Architecture
- 5.3 Graphic programming with Node-RED
- 5.3.1 Node-RED page
- 5.3.2 Tag Inventory
- 5.3.3 Tag Read
- 5.3.4 Tag Write
- 5.3.5 Tag Lock
- 5.3.6 Tag Kill
- 5.3.7 Tag Access Results
- 5.3.8 Get DIO value
- 5.3.9 Get counter value
- 5.3.10 Get counter status
- 5.3.11 Get DO pulse count and continue mode
- 5.3.12 Get latch status
- 5.3.13 Set DO value
- 5.3.14 Set counter value
- 5.3.15 Set DO pulse
- 5.3.16 Clear latch
- 5.4 API for Development
- A RFID node output
- B RFID module error code
- C RFID Frequency Channel Tables
- C.1 United States/Canada/Mexico Region Frequency Channel Table
- C.2 Europe Region Frequency Channel Table (ETSI EN 302 208)
- C.3 Europe2 Region Frequency Channel Table(ETSI EN 300 220)
- C.4 Taiwan Region Frequency Channel Table
- C.5 China Region Frequency Channel Table
- C.6 South Korea Region Frequency Channel Table
- C.7 Australia/New Zealand Region Frequency Channel Table
- C.8 Brazil Region Frequency Channel Table
- C.9 Israel Region Frequency Channel Table
- C.10 India Region Frequency Channel Table
- C.11 Japan Region Frequency Channel Table
- C.12 Japan2 Region Frequency Channel Table (with LBT)
27 WISE-2834 User Manual
Chapter 4 System Configuration
4.3.3 RFID tag filter settings
Filter target: Bank 1, EPC
– Without CRC and PC.
Mask match: Determines if the related tag-protocol operation will be applied to
tags that match the mask or not
– 0, Inverse: exclusive the condition
– 1, Regular: match the condition
Memory bank offset: the offset in bits, from the start of the EPC of the first bit
that will be matched against the mask
Mask bit count: The number of bits in the mask
Mask data (Hex): The mapping mask data
4.3.4 RFID advanced setting and troubleshooting
Link profile: the modulation type and data rate
– DSB-ASK 40kbps
– PR-ASK 62.5kbps
– P R - A S K 7 5 k b p s
– DSB-ASK 400kbps
Channel flag: Single channel or hopping
– Hopping: Frequency output uses "hopping" method in the local frequency
band
– Single: Only choose "single" frequency in the local frequency band
Frequency: the frequency that reader search tags
The frequency need to be set up if a user select "single" for channel flag