User's Manual
Table Of Contents
- WISE-2834
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 5 Software Programming (Node- RED)
- 5.1 Terminology Definition
- 5.2 System Architecture
- 5.3 Graphic programming with Node-RED
- 5.3.1 Node-RED page
- 5.3.2 Tag Inventory
- 5.3.3 Tag Read
- 5.3.4 Tag Write
- 5.3.5 Tag Lock
- 5.3.6 Tag Kill
- 5.3.7 Tag Access Results
- 5.3.8 Get DIO value
- 5.3.9 Get counter value
- 5.3.10 Get counter status
- 5.3.11 Get DO pulse count and continue mode
- 5.3.12 Get latch status
- 5.3.13 Set DO value
- 5.3.14 Set counter value
- 5.3.15 Set DO pulse
- 5.3.16 Clear latch
- 5.4 API for Development
- A RFID node output
- B RFID module error code
- C RFID Frequency Channel Tables
- C.1 United States/Canada/Mexico Region Frequency Channel Table
- C.2 Europe Region Frequency Channel Table (ETSI EN 302 208)
- C.3 Europe2 Region Frequency Channel Table(ETSI EN 300 220)
- C.4 Taiwan Region Frequency Channel Table
- C.5 China Region Frequency Channel Table
- C.6 South Korea Region Frequency Channel Table
- C.7 Australia/New Zealand Region Frequency Channel Table
- C.8 Brazil Region Frequency Channel Table
- C.9 Israel Region Frequency Channel Table
- C.10 India Region Frequency Channel Table
- C.11 Japan Region Frequency Channel Table
- C.12 Japan2 Region Frequency Channel Table (with LBT)
23 WISE-2834 User Manual
Chapter 4 System Configuration
4.2.3 Date/time, time zone settings
ConfigurationTime & Date
– Current Time
– Time Zone
– Time Calibration
4.2.4 System restart
ConfigurationControl
Click button to soft-restart system
4.2.5 Watch dog enable/disable
ConfigurationGeneral
Scan Interval: Frequency update of I/O status
WDT: Enable/disable watch dog function
0: Turn off WDT function
> 0: Turn on WDT function. E.g. inpt 10, 10*10s=100sec → WISE-2834
system don’t operate about 100 seconds, and system will restart auto-
matically. WDT function will start in 5 minutes after WISE-2834 power
on