User's Manual
Table Of Contents
- WISE-221X
- Contents
- 1 Product Overview
- 2 Product Specification
- 3 Mechanical and Hardware Installation
- 4 System Configuration
- 4.1 Connection
- 4.2 Configuring WISE-4210-AP with Browser
- 4.3 Install WISE Studio and Configure End Devices
- 4.4 Connection between AP and Nodes
- 4.5 Configure WISE-4210-AP
- 4.6 Setup WISE-221x Network
- 4.7 WISE-221x IO configuration
- 4.8 Access WISE-221x Data by Modbus/TCP Protocol
- 4.9 Push WISE-4210 data by RESTful Web Service
- 4.10 Access WISE-4210 I/O Data by RESTful API
29 WISE-221X User Manual
Chapter 4 System Configuration
4.8 Access WISE-221x Data by Modbus/TCP
Protocol
Go to "Configuration \ Modbus \ Modbus ID" to check and configure the Modbus
ID of each MAC address of AP and end node devices. User can use Modbus/TCP
and Modbus/RTU protocol to access each end devices by WISE-4210-AP, polling
data from different Modbus ID for different end node devices, or AP.