User's Manual

WISE-1510 User Manual 39
operating mode (DevOpMode): 1 for Harmony Link* and 2 for LoRaWAN. Here,
Harmony Link is selected as the default. (line 225) If you’d like to use LoRaWAN,
change it from 1 to 2.
* Harmony Link is Advantech’s proprietary LoRa MAC.
7. You can select which class of Node: 1 for Class A, and 3 for Class C. (2 for Class B
is reserved for future use.) Here, Class C is selected (line 226).
8. The remaining part are used to set radio related parameters, including data rate
(DevAdvwiseDataRate), frequency (DevAdvwiseFreq) and transmission power
(DevAdvwiseTxPwr) (line 227~229). Please be noted all of RF parameters are
region dependent, so you’ve to set their values accordingly. Make sure you DO
NOT violate the regional regulation.
After all parameters are configured, be reminded to apply them by nodeApiApplyCfg().