User's Manual

WISE-1510 User Manual 20
2.5.2. Debug Port Setting
WISE-1510 can communicate with a host server (Windows or Linux) by using serial
cables. Common serial communication programs such as Hyper Terminal, Tera Term
or PuTTY can be used in this case. The example below describes the serial terminal
setup using Hyper Terminal on a Windows host:
1. Connect WISE-ED20 with your Windows PC by using a serial cable.
2. Open Hyper Terminal on your Windows PC, and select the settings as shown in
Figure 9.
3. Terminal will show the image version as Figure 10.