User manual

43 Chapter 3
3.4 Installing a PCI-bus Card
The procedure for installing a PCI-bus card into the UNO-3072L is listed
below. Please
follow these steps carefully.
1. Remove the power cord.
2 .Remove the upper cover of UNO-3072L.
3. Unscrew the screw of a PCI bracket, and remove it.
4. Plug-in PCI-bus card in a PCI-slot of UNO-3072L.
5. Screw the 1st anti-vibration rubber towards the 1st PCI card until it
is
fixed. (Figure 3.2).
Figure 3.1: 1st Anti-Vibration Rubber
6. Install PCI extension to hold 2nd anti-vibration rubber (Figure 3.3)
and screw the 2nd anti-vibration rubber towards the 2nd PCI
card until it is
fixed.