User manual

UNO-1140/F User Manual 16
Chapter 3 Initial Setup
3.1 CompactFlash Installation
The procedure for installing a CompactFlash card into the UNO-1140/F is
as follows, please follows these steps carefully.
1. Remove the power.
2. Unscrew six screws of the rear cover of UNO-1140/F.
3. Remove the rear cover.
4. Plug a CompactFlash card with user’s OS and application program
into a CompactFlash card slot on board.
5. Screw back the rear cover with the six screws.
3.2 Chassis Grounding
Figure 3.1: Chassis Grounding Connection
3.3 Power Connection
Connect the UNO-1140/F to a 9 ~ 36 VDC power source. The power
source can either be from a power adapter or an in-house power source.